Zyvpee
Zyvpee AD0612VB-A71GP 60mm Case Fan 12V 0.54A 2 Wire
A 60 mm ball-bearing case fan running on 12 V with a two-wire connector for standard DC cooling
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector2 Wires
- ColorBlack
- LEDNon-LED
- 60 mm frame fits tight chassis spaces
- ball bearing runs smoothly under continuous load
- 12 V 0.54 A draw keeps power use low
- two-wire connector plugs straight into standard headers
- black non-LED design stays discreet in any build
60 mm Case Fan for Compact Builds
The Zyvpee AD0612VB-A71GP is a 60 mm by 25 mm case fan designed for direct 12 V DC operation. It uses a two-wire power connector and a ball bearing for continuous rotation in tight chassis locations.
Suited for Replacements and Small Form Factor Cases
This unit fits builders who need a direct 12 V replacement for an existing 60 mm mount or who are assembling a compact system with limited clearance. Buyers who require PWM speed control or a three- or four-pin header will not be able to use this fan.
12 V 0.54 A Two-Wire Power Requirement
The fan draws 0.54 A at 12 V through a two-wire lead, so the motherboard or controller must supply that voltage and current on a compatible header. Verify the connector type and available current before installation.
Ciri-ciri utama
- 60 mm frame fits tight chassis spaces
- ball bearing runs smoothly under continuous load
- 12 V 0.54 A draw keeps power use low
- two-wire connector plugs straight into standard headers
- black non-LED design stays discreet in any build
Spesifikasi
| Brand | Zyvpee |
|---|---|
| Series | AD0612VB-A71GP |
| Model | AD0612VB-A71GP |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 2 Wires |
| Color | Black |
| LED | Non-LED |
| Features | DC Case Fan |
| Dimensions | 60*25mm |
Soalan tentang produk ini
Should I choose the 12 V 0.54 A version or a different voltage?
The fan is built for 12 V operation and draws 0.54 A from the supply rail.
What does the 0.54 A current draw mean once the fan is installed?
At 12 V the fan will pull roughly 0.54 A, so the motherboard header must supply at least that much current.
How does the 2-wire connector limit speed control?
A 2-wire lead provides power and ground only, so the fan runs at full speed whenever voltage is applied.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001049BTC
Ada stok