Zyvpee
Zyvpee AD0612VB-A71GP 60mm Case Fan 12V 0.54A 2 Wire
A 60 mm ball-bearing case fan running on 12 V with a two-wire connector for standard DC cooling
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector2 Wires
- ColorBlack
- LEDNon-LED
- 60 mm frame fits tight chassis spaces
- ball bearing runs smoothly under continuous load
- 12 V 0.54 A draw keeps power use low
- two-wire connector plugs straight into standard headers
- black non-LED design stays discreet in any build
60 mm Case Fan for Compact Builds
The Zyvpee AD0612VB-A71GP is a 60 mm by 25 mm case fan designed for direct 12 V DC operation. It uses a two-wire power connector and a ball bearing for continuous rotation in tight chassis locations.
Suited for Replacements and Small Form Factor Cases
This unit fits builders who need a direct 12 V replacement for an existing 60 mm mount or who are assembling a compact system with limited clearance. Buyers who require PWM speed control or a three- or four-pin header will not be able to use this fan.
12 V 0.54 A Two-Wire Power Requirement
The fan draws 0.54 A at 12 V through a two-wire lead, so the motherboard or controller must supply that voltage and current on a compatible header. Verify the connector type and available current before installation.
Kohokohdat
- 60 mm frame fits tight chassis spaces
- ball bearing runs smoothly under continuous load
- 12 V 0.54 A draw keeps power use low
- two-wire connector plugs straight into standard headers
- black non-LED design stays discreet in any build
Tekniset tiedot
| Brand | Zyvpee |
|---|---|
| Series | AD0612VB-A71GP |
| Model | AD0612VB-A71GP |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 2 Wires |
| Color | Black |
| LED | Non-LED |
| Features | DC Case Fan |
| Dimensions | 60*25mm |
Kysymyksiä tästä tuotteesta
Should I choose the 12 V 0.54 A version or a different voltage?
The fan is built for 12 V operation and draws 0.54 A from the supply rail.
What does the 0.54 A current draw mean once the fan is installed?
At 12 V the fan will pull roughly 0.54 A, so the motherboard header must supply at least that much current.
How does the 2-wire connector limit speed control?
A 2-wire lead provides power and ground only, so the fan runs at full speed whenever voltage is applied.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001048BTC
Varastossa