Zyvpee
Zyvpee FBA09A12U 90 mm 25 mm 12 V 0.55 A 3-wire case fan
A 90 mm ball-bearing case fan running at 12 V with a three-wire connector for CPU cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Wires
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling
- 90 mm square frame fits standard mounting points
- 25 mm thick profile suits compact chassis layouts
- Ball bearing design supports continuous operation cycles
- 12 V 0.55 A three-wire connector enables speed monitoring
- Non-LED black finish keeps internal lighting neutral
Compact square frame
This Zyvpee case fan uses a 90 by 25 mm square frame with ball-bearing construction. It runs on 12 V power and draws 0.55 A through a standard three-wire connector. The black, non-LED design targets CPU cooling in space-constrained builds.
Suits tight clearance builds
Builders working with small-form-factor cases or side-panel mounts where a 92 mm square footprint is the maximum allowance will find this fan fits. It is not for systems that require PWM speed control or addressable lighting effects.
Three-wire voltage control
The only speed-control method provided is the three-wire voltage header on the motherboard. If your board lacks voltage regulation for fan headers, the fan will run at full speed continuously.
Ciri-ciri utama
- 90 mm square frame fits standard mounting points
- 25 mm thick profile suits compact chassis layouts
- Ball bearing design supports continuous operation cycles
- 12 V 0.55 A three-wire connector enables speed monitoring
- Non-LED black finish keeps internal lighting neutral
Spesifikasi
| Brand | Zyvpee |
|---|---|
| Series | FBA09A12U |
| Model | FBA09A12U |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 90*25MM |
Soalan tentang produk ini
Does the 3-wire connector on this FBA09A12U fan plug straight into a standard 12 V motherboard header?
Yes, the three-wire lead is designed for a 12 V motherboard fan header and will supply the rated .55 A directly.
Will this 90 mm square frame fit the same mounting holes as my existing 92 mm round-frame fan?
The fan measures 90 mm square by 25 mm thick, so the mounting pattern differs from a 92 mm round frame and new holes would be needed.
How can I confirm the ball-bearing motor is spinning at full speed once installed?
Connect the fan, enter the BIOS or fan-control software and verify the reported RPM matches the expected speed for a 12 V .55 A unit.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001044BTC
Ada stok