Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 90 by 25 mm square case fan with three wires

Zyvpee

Zyvpee FBA09A12U 90 mm 25 mm 12 V 0.55 A 3-wire case fan

SKU CH-2CYS-AH3E4

A 90 mm ball-bearing case fan running at 12 V with a three-wire connector for CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • 90 mm square frame fits standard mounting points
  • 25 mm thick profile suits compact chassis layouts
  • Ball bearing design supports continuous operation cycles
  • 12 V 0.55 A three-wire connector enables speed monitoring
  • Non-LED black finish keeps internal lighting neutral

Compact square frame

This Zyvpee case fan uses a 90 by 25 mm square frame with ball-bearing construction. It runs on 12 V power and draws 0.55 A through a standard three-wire connector. The black, non-LED design targets CPU cooling in space-constrained builds.

Suits tight clearance builds

Builders working with small-form-factor cases or side-panel mounts where a 92 mm square footprint is the maximum allowance will find this fan fits. It is not for systems that require PWM speed control or addressable lighting effects.

Three-wire voltage control

The only speed-control method provided is the three-wire voltage header on the motherboard. If your board lacks voltage regulation for fan headers, the fan will run at full speed continuously.

Pluspunten

  • 90 mm square frame fits standard mounting points
  • 25 mm thick profile suits compact chassis layouts
  • Ball bearing design supports continuous operation cycles
  • 12 V 0.55 A three-wire connector enables speed monitoring
  • Non-LED black finish keeps internal lighting neutral

Specificaties

BrandZyvpee
SeriesFBA09A12U
ModelFBA09A12U
TypeCase Fan
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions90*25MM

Vragen over dit artikel

Does the 3-wire connector on this FBA09A12U fan plug straight into a standard 12 V motherboard header?

Yes, the three-wire lead is designed for a 12 V motherboard fan header and will supply the rated .55 A directly.

Will this 90 mm square frame fit the same mounting holes as my existing 92 mm round-frame fan?

The fan measures 90 mm square by 25 mm thick, so the mounting pattern differs from a 92 mm round frame and new holes would be needed.

How can I confirm the ball-bearing motor is spinning at full speed once installed?

Connect the fan, enter the BIOS or fan-control software and verify the reported RPM matches the expected speed for a 12 V .55 A unit.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.