Zyvpee
Zyvpee KDE1208PTV3 80×25 mm 12 V 0.9 W 2-wire case fan
An 80 mm maglev fan delivering up to 1600 RPM at 12 V and 0.9 W for CPU cooler use
- TypeCPU Cooler Fan
- CompatibilityCPU Cooler
- Bearing TypeMaglev
- RPM<1600 RPM
- Power Connector2 Wires
- ColorBlack
- Maglev bearing reduces friction for quieter operation
- 12 V 0.9 W draw keeps power use low
- 80 × 25 mm frame fits standard 80 mm mounts
- Under 1 600 RPM limit cuts noise at idle
- Two-wire connector simplifies motherboard hookup
Compact 80 mm maglev cooler fan
The Zyvpee KDE1208PTV3 is an 80×25 mm case fan designed for CPU cooler mounting. It runs on 12 V DC power and draws 0.9 W through a two-wire lead. Maglev bearing technology keeps friction low at speeds below 1600 RPM. Black frame with no LED lighting suits stealth builds.
Builders needing simple 12 V airflow
This two-wire unit fits coolers that accept an 80 mm frame and do not require a tachometer or PWM signal. It is not suited for headers that expect speed reporting or four-pin control. Systems needing variable-speed curves or motherboard monitoring should choose a three- or four-wire alternative.
Two-wire power connector
The fan terminates in a basic two-wire lead delivering 12 V at 0.9 W without a third wire for RPM feedback. This connector type determines whether the fan can report speed to the motherboard or support PWM regulation. Verify that your cooler or header accepts a two-wire device before purchasing.
Ciri-ciri utama
- Maglev bearing reduces friction for quieter operation
- 12 V 0.9 W draw keeps power use low
- 80 × 25 mm frame fits standard 80 mm mounts
- Under 1 600 RPM limit cuts noise at idle
- Two-wire connector simplifies motherboard hookup
Spesifikasi
| Brand | Zyvpee |
|---|---|
| Series | KDE1208PTV3 |
| Model | KDE1208PTV3 |
| Type | CPU Cooler Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Maglev |
| RPM | <1600 RPM |
| Power Connector | 2 Wires |
| Color | Black |
| LED | Non-LED |
| Features | 8CM CPU Cooling |
| Dimensions | 80*25MM |
Soalan tentang produk ini
Will the 80 mm frame and 25 mm thickness fit the cooler bracket I already use?
The fan measures 80 mm by 25 mm, matching the standard 8025 mounting pattern used by many CPU coolers.
How can I confirm the Maglev bearing is spinning at the rated speed after installation?
The fan runs below 1600 RPM; use BIOS or monitoring software to verify the reported speed stays under that figure.
Does the package include any mounting screws or a 3-pin adapter for the 2-wire lead?
The unit ships as the bare fan with a 2-wire power connector; screws and adapters are not included.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001049BTC
Ada stok