نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 80×25 mm case fan with two wires

Zyvpee

Zyvpee KDE1208PTV3 80×25 mm 12 V 0.9 W 2-wire case fan

SKU CH-MBE1-QEGPT

An 80 mm maglev fan delivering up to 1600 RPM at 12 V and 0.9 W for CPU cooler use

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Wires
  • ColorBlack
  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.9 W draw keeps power use low
  • 80 × 25 mm frame fits standard 80 mm mounts
  • Under 1 600 RPM limit cuts noise at idle
  • Two-wire connector simplifies motherboard hookup

Compact 80 mm maglev cooler fan

The Zyvpee KDE1208PTV3 is an 80×25 mm case fan designed for CPU cooler mounting. It runs on 12 V DC power and draws 0.9 W through a two-wire lead. Maglev bearing technology keeps friction low at speeds below 1600 RPM. Black frame with no LED lighting suits stealth builds.

Builders needing simple 12 V airflow

This two-wire unit fits coolers that accept an 80 mm frame and do not require a tachometer or PWM signal. It is not suited for headers that expect speed reporting or four-pin control. Systems needing variable-speed curves or motherboard monitoring should choose a three- or four-wire alternative.

Two-wire power connector

The fan terminates in a basic two-wire lead delivering 12 V at 0.9 W without a third wire for RPM feedback. This connector type determines whether the fan can report speed to the motherboard or support PWM regulation. Verify that your cooler or header accepts a two-wire device before purchasing.

أبرز المميزات

  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.9 W draw keeps power use low
  • 80 × 25 mm frame fits standard 80 mm mounts
  • Under 1 600 RPM limit cuts noise at idle
  • Two-wire connector simplifies motherboard hookup

المواصفات

BrandZyvpee
SeriesKDE1208PTV3
ModelKDE1208PTV3
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
Features8CM CPU Cooling
Dimensions80*25MM

أسئلة حول هذا المنتج

Will the 80 mm frame and 25 mm thickness fit the cooler bracket I already use?

The fan measures 80 mm by 25 mm, matching the standard 8025 mounting pattern used by many CPU coolers.

How can I confirm the Maglev bearing is spinning at the rated speed after installation?

The fan runs below 1600 RPM; use BIOS or monitoring software to verify the reported speed stays under that figure.

Does the package include any mounting screws or a 3-pin adapter for the 2-wire lead?

The unit ships as the bare fan with a 2-wire power connector; screws and adapters are not included.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.