Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black 92x25mm maglev case fan with 4-pin connector and eight mounting holes

Zyvpee

Zyvpee KDE1209PTVX 92x25mm 12V 4.4W 4-pin maglev case fan

SKU CH-KYKN-0MQJH

92×25 mm maglev fan draws 4.4 W at 12 V with a 4-pin connector and eight mounting holes

  • TypeCPU Cooler Fan
  • Bearing TypeMaglev
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Maglev bearing reduces friction for quieter operation
  • 4-pin PWM connector enables precise speed control
  • 92 × 25 mm frame fits standard 92 mm mounts
  • Eight mounting holes give flexible installation options
  • 12 V 4.4 W rating delivers efficient cooling power

92 mm maglev CPU cooler fan

The Zyvpee KDE1209PTVX is a 12 V, 4.4 W case fan built around a maglev bearing for low-noise CPU cooling. It uses a 4-pin power connector so the motherboard can regulate speed precisely. The black, non-LED frame measures 92 by 25 mm and carries the Sunon series designation. It targets builders replacing the original cooler fan in compatible Dell XPS systems.

Check mounting pattern and connector

Verify that your current heatsink uses an 8-hole layout matching the 9025 hole spacing before ordering. Confirm the motherboard header supplies a standard 4-pin PWM signal at 12 V; a 3-pin header will run the fan at full speed only. Cross-reference the P281K, XPS 730 or 730X service tag to ensure the physical shroud and screw positions align with this 92 mm frame.

No bundled accessories or software

The package contains only the fan unit itself; no mounting screws, adapters, cables or control software are included. Re-use the original fasteners from the Dell cooler or source M3 hardware separately. The lack of RGB or addressable LEDs means no lighting ecosystem integration is possible. Installation is a direct mechanical swap once the mounting holes are confirmed.

Ciri-ciri utama

  • Maglev bearing reduces friction for quieter operation
  • 4-pin PWM connector enables precise speed control
  • 92 × 25 mm frame fits standard 92 mm mounts
  • Eight mounting holes give flexible installation options
  • 12 V 4.4 W rating delivers efficient cooling power

Spesifikasi

BrandZyvpee
SeriesKDE1209PTVX
ModelKDE1209PTVX
TypeCPU Cooler Fan
Bearing TypeMaglev
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions92*25MM

Soalan tentang produk ini

What comes in the box and what must be purchased separately?

The box contains the 92 mm maglev fan with a 4-pin connector and eight mounting holes. Mounting screws are not included and must be sourced separately.

Which version of the KDE1209PTVX matches a Dell XPS 730 or 730X?

The KDE1209PTVX labelled 13.MS.B2623.AF.GN is the direct replacement for the P281K cooler used in XPS 730 and 730X systems.

What does the 4.4 W rating mean once the fan is installed?

At 12 V the fan draws 4.4 W, so the motherboard header must supply at least that much power for full speed operation.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.