نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 92x25mm maglev case fan with 4-pin connector and eight mounting holes

Zyvpee

Zyvpee KDE1209PTVX 92x25mm 12V 4.4W 4-pin maglev case fan

SKU CH-KYKN-0MQJH

92×25 mm maglev fan draws 4.4 W at 12 V with a 4-pin connector and eight mounting holes

  • TypeCPU Cooler Fan
  • Bearing TypeMaglev
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Maglev bearing reduces friction for quieter operation
  • 4-pin PWM connector enables precise speed control
  • 92 × 25 mm frame fits standard 92 mm mounts
  • Eight mounting holes give flexible installation options
  • 12 V 4.4 W rating delivers efficient cooling power

92 mm maglev CPU cooler fan

The Zyvpee KDE1209PTVX is a 12 V, 4.4 W case fan built around a maglev bearing for low-noise CPU cooling. It uses a 4-pin power connector so the motherboard can regulate speed precisely. The black, non-LED frame measures 92 by 25 mm and carries the Sunon series designation. It targets builders replacing the original cooler fan in compatible Dell XPS systems.

Check mounting pattern and connector

Verify that your current heatsink uses an 8-hole layout matching the 9025 hole spacing before ordering. Confirm the motherboard header supplies a standard 4-pin PWM signal at 12 V; a 3-pin header will run the fan at full speed only. Cross-reference the P281K, XPS 730 or 730X service tag to ensure the physical shroud and screw positions align with this 92 mm frame.

No bundled accessories or software

The package contains only the fan unit itself; no mounting screws, adapters, cables or control software are included. Re-use the original fasteners from the Dell cooler or source M3 hardware separately. The lack of RGB or addressable LEDs means no lighting ecosystem integration is possible. Installation is a direct mechanical swap once the mounting holes are confirmed.

أبرز المميزات

  • Maglev bearing reduces friction for quieter operation
  • 4-pin PWM connector enables precise speed control
  • 92 × 25 mm frame fits standard 92 mm mounts
  • Eight mounting holes give flexible installation options
  • 12 V 4.4 W rating delivers efficient cooling power

المواصفات

BrandZyvpee
SeriesKDE1209PTVX
ModelKDE1209PTVX
TypeCPU Cooler Fan
Bearing TypeMaglev
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions92*25MM

أسئلة حول هذا المنتج

What comes in the box and what must be purchased separately?

The box contains the 92 mm maglev fan with a 4-pin connector and eight mounting holes. Mounting screws are not included and must be sourced separately.

Which version of the KDE1209PTVX matches a Dell XPS 730 or 730X?

The KDE1209PTVX labelled 13.MS.B2623.AF.GN is the direct replacement for the P281K cooler used in XPS 730 and 730X systems.

What does the 4.4 W rating mean once the fan is installed?

At 12 V the fan draws 4.4 W, so the motherboard header must supply at least that much power for full speed operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.