Zyvpee
Zyvpee SFF22D 105×98×36mm DC blower case fan
Compact centrifugal blower fan measuring 105×98×36 mm with a 3-pin DC motor running at 1600–1999 RPM and 25–30 dBA noise
- TypeCase Fan
- CompatibilityCase
- Fan Size108mm
- RPM1600-1999 RPM
- Noise Level25 - 30 dBA
- Power Connector3 Pin
- Compact blower design fits tight 105×98×36 mm spaces
- DC 10 V 0.51 A motor runs at 1600-1999 RPM
- Quiet 25-30 dBA operation keeps noise low
- 3-pin connector enables simple motherboard control
- Non-LED two-tone finish suits clean builds
Compact blower for tight builds
The Zyvpee SFF22D is a 105×98×36 mm centrifugal fan built for small-form-factor cases and rack units where axial airflow cannot reach restricted channels. It runs on 10 V DC at 0.51 A and spins between 1600 and 1999 RPM.
Three-pin DC power and focused exhaust
A standard three-pin connector supplies variable-speed control from any compatible header or fan controller. The blower wheel pulls air in axially and pushes it out through a narrow outlet, clearing heat from dense fin stacks or GPU shrouds without needing side-panel clearance.
Suits SFF integrators and silent HTPC owners
Builders who need directed airflow in a 108 mm mounting footprint will benefit from the 25–30 dBA acoustic range. Buyers requiring PWM regulation, addressable lighting or higher static pressure for radiator stacks should look at alternatives.
Ciri-ciri utama
- Compact blower design fits tight 105×98×36 mm spaces
- DC 10 V 0.51 A motor runs at 1600-1999 RPM
- Quiet 25-30 dBA operation keeps noise low
- 3-pin connector enables simple motherboard control
- Non-LED two-tone finish suits clean builds
Spesifikasi
| Series | SFF22D |
|---|---|
| Model | SFF22D |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 108mm |
| RPM | 1600-1999 RPM |
| Noise Level | 25 - 30 dBA |
| Power Connector | 3 Pin |
| Color | 2-Tone |
| LED | Non-LED |
| Features | DC Blower |
| Dimensions | 105*98*36mm |
Soalan tentang produk ini
At what RPM does the SFF22D blower top out under sustained load?
The fan spins between 1600 and 1999 RPM depending on voltage and load.
How loud and how much current does the 10 V DC blower draw when running continuously?
It operates at 25 to 30 dBA while drawing 0.51 A from a 10 V supply.
What motherboard header is required to power this 3-pin blower fan?
A standard 3-pin DC fan header supplies the 10 V needed for the SFF22D.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001049BTC
Ada stok