Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular blower fan, two-tone finish, three-pin connector, compact 105 by 98 by 36 mm

Zyvpee

Zyvpee SFF22D 105×98×36mm DC blower case fan

SKU CH-VVY6-PVBTP

Compact centrifugal blower fan measuring 105×98×36 mm with a 3-pin DC motor running at 1600–1999 RPM and 25–30 dBA noise

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size108mm
  • RPM1600-1999 RPM
  • Noise Level25 - 30 dBA
  • Power Connector3 Pin
  • Compact blower design fits tight 105×98×36 mm spaces
  • DC 10 V 0.51 A motor runs at 1600-1999 RPM
  • Quiet 25-30 dBA operation keeps noise low
  • 3-pin connector enables simple motherboard control
  • Non-LED two-tone finish suits clean builds

Compact blower for tight builds

The Zyvpee SFF22D is a 105×98×36 mm centrifugal fan built for small-form-factor cases and rack units where axial airflow cannot reach restricted channels. It runs on 10 V DC at 0.51 A and spins between 1600 and 1999 RPM.

Three-pin DC power and focused exhaust

A standard three-pin connector supplies variable-speed control from any compatible header or fan controller. The blower wheel pulls air in axially and pushes it out through a narrow outlet, clearing heat from dense fin stacks or GPU shrouds without needing side-panel clearance.

Suits SFF integrators and silent HTPC owners

Builders who need directed airflow in a 108 mm mounting footprint will benefit from the 25–30 dBA acoustic range. Buyers requiring PWM regulation, addressable lighting or higher static pressure for radiator stacks should look at alternatives.

Puncte forte

  • Compact blower design fits tight 105×98×36 mm spaces
  • DC 10 V 0.51 A motor runs at 1600-1999 RPM
  • Quiet 25-30 dBA operation keeps noise low
  • 3-pin connector enables simple motherboard control
  • Non-LED two-tone finish suits clean builds

Specificații

SeriesSFF22D
ModelSFF22D
TypeCase Fan
CompatibilityCase
Fan Size108mm
RPM1600-1999 RPM
Noise Level25 - 30 dBA
Power Connector3 Pin
Color2-Tone
LEDNon-LED
FeaturesDC Blower
Dimensions105*98*36mm

Întrebări despre acest articol

At what RPM does the SFF22D blower top out under sustained load?

The fan spins between 1600 and 1999 RPM depending on voltage and load.

How loud and how much current does the 10 V DC blower draw when running continuously?

It operates at 25 to 30 dBA while drawing 0.51 A from a 10 V supply.

What motherboard header is required to power this 3-pin blower fan?

A standard 3-pin DC fan header supplies the 10 V needed for the SFF22D.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.