Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two green DDR2 DIMM sticks with black chips and gold contacts

A-Tech

A-Tech 4GB (2x2GB) DDR2 1066MHz PC2-8500 Desktop RAM

SKU CH-84WH-KC3VJ

A 4 GB dual-channel DDR2 1066 MHz kit with two 240-pin unbuffered DIMMs at 1.8 V for desktop upgrades

  • Capacity4GB (2 x 2GB)
  • SpeedDDR2 1066 (PC2 8500)
  • Tested Frequency1066
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 4GB (2 x 2GB)

Speed DDR2 1066 (PC2 8500)

  • Dual-channel kit doubles bandwidth for smoother multitasking
  • 1066 MHz tested frequency accelerates application loading
  • 8 V standard DDR2 voltage keeps power draw low
  • 240-pin DIMM form factor fits compatible desktop motherboards
  • Non-ECC unbuffered design suits mainstream desktop systems

DDR2 1066MHz dual-channel kit

This A-Tech kit provides 4GB of DDR2 desktop memory in two matched 2GB modules. It is built for systems that accept 240-pin DIMMs running at PC2-8500 speed. The modules are unbuffered and non-ECC, making them suitable for standard desktop motherboards. Compatibility spans a wide range of AMD and Intel platforms that support DDR2 1066MHz.

Standard voltage and tested frequency

Each module operates at the DDR2 standard voltage of 1.8V and has been tested at 1066MHz. The dual-channel configuration allows the memory controller to access both modules simultaneously for improved bandwidth. Quality assurance testing is performed on every module to verify reliable operation under normal desktop workloads. The kit is designed for straightforward installation in compatible desktop computers.

1066MHz tested frequency

The single specification that determines fit is the tested frequency of 1066MHz, labelled PC2-8500. Your motherboard and processor must support DDR2 at this exact speed for the kit to run at its rated performance. If the platform only supports lower DDR2 speeds, the modules will typically downclock automatically. Always verify the supported memory specification of your system before purchase.

Høydepunkter

  • Dual-channel kit doubles bandwidth for smoother multitasking
  • 1066 MHz tested frequency accelerates application loading
  • 8 V standard DDR2 voltage keeps power draw low
  • 240-pin DIMM form factor fits compatible desktop motherboards
  • Non-ECC unbuffered design suits mainstream desktop systems

Spesifikasjoner

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity4GB (2 x 2GB)
SpeedDDR2 1066 (PC2 8500)
Tested Frequency1066
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Does this kit require a motherboard with DDR2 1066 support?

The modules are tested at 1066 MHz and will run at the highest speed the motherboard allows, so they will operate in DDR2 1066 slots and downshift if the board only supports lower DDR2 speeds.

What voltage do these modules use and is it standard for DDR2?

They run at 1.8 V, which is the standard DDR2 voltage, so no special voltage settings are needed.

Are the modules ECC or registered?

They are non‑ECC unbuffered DIMMs, the typical type for desktop PCs.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.