Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Small brass nozzle with knurled silver collar and quick-release button

Adventurer 5M Pro Nozzle 0.6mm 32mm³/s 280°C 3s Quick-Detachable 3d printers accessory

SKU CH-25SM-WDC94

A hardened 0.6 mm nozzle delivers 32 mm³/s flow at up to 280 °C and swaps in three seconds

  • TypeAD5-HS-Nozzle
  • Compatible System0.4 mm
  • Specification0.4 mm
  • Features0.4 mm
  • High flow 32 mm³/s supports rapid printing speeds
  • Quick-detachable design removes nozzle in 3 seconds
  • Hardened 0.6 mm tip withstands abrasive filaments
  • Heats to 200 °C in 35 seconds for fast starts
  • Maximum temperature 280 °C enables advanced materials

0.6 mm high-flow nozzle for Adventurer 5M Pro

This 0.6 mm hardened nozzle is built for the Adventurer 5M Pro hotend. It supports a maximum flow rate of 32 mm³/s and withstands temperatures up to 280 °C. The tool-free quick-detach mechanism removes the nozzle in roughly three seconds. It targets users printing abrasive or high-strength filaments at speed.

280 °C limit and 35-second heat-up constrain

The nozzle reaches 200 °C in about 35 seconds and tops out at 280 °C. Filaments requiring higher processing temperatures cannot be used. The 0.6 mm bore sets a practical lower bound on layer height and detail resolution. Buyers needing finer features or higher-temperature polymers should look elsewhere.

32 mm³/s flow rate defines high-speed capability

The rated 32 mm³/s extrusion rate is the single figure that determines whether this nozzle matches your speed targets. At 0.6 mm diameter it balances throughput with the durability needed for carbon-fibre composites. If your workflow demands a different volumetric rate, another nozzle size is required.

Høydepunkter

  • High flow 32 mm³/s supports rapid printing speeds
  • Quick-detachable design removes nozzle in 3 seconds
  • Hardened 0.6 mm tip withstands abrasive filaments
  • Heats to 200 °C in 35 seconds for fast starts
  • Maximum temperature 280 °C enables advanced materials

Spesifikasjoner

BrandA
ModelAD5-HS-Nozzle
Part NumberAD5-HS-Nozzle
TypeAD5-HS-Nozzle
Compatible System0.4 mm
Specification0.4 mm
Features0.4 mm

Spørsmål om denne varen

Should I choose the 0.25 mm, 0.4 mm, 0.6 mm or 0.8 mm nozzle for my printer?

The 0.6 mm nozzle handles abrasive filaments such as carbon fibre and provides higher flow. The 0.25 mm gives fine detail, the 0.4 mm balances speed and precision, and the 0.8 mm offers maximum throughput.

What does the 32 mm³/s flow rate mean when the nozzle is installed?

It allows the hotend to extrude up to 32 cubic millimetres of filament per second, supporting stable high-speed printing with the 0.6 mm aperture.

How does the quick-detachable interface work and what does it limit?

A button releases the nozzle in about 3 seconds without tools. It is designed for the Adventurer 5M hotend, so compatibility is limited to that system.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.