Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.
Athena Power
An M.2 NVMe PCIe adapter backplane cage with full-height and low-profile brackets supporting 2230/2242/2260/2280 SSDs at Gen3 32 Gbps and Gen4 64 Gbps
The Athena Power SP-M21NVME fits a single M.2 NVMe M-key SSD into a PCIe x4 slot. It ships with both a full-height bracket and a low-profile bracket for different chassis. The metal tray holds drives from 2230 up to 2280 length and uses anti-vibration springs for stability. No external cables or AC adapter are required.
The enclosure relies on the metal cage and system airflow to dissipate heat without a fan. Power comes directly from the PCIe slot, so there is no separate power connector. The adapter works with PCIe 3.0 and 4.0 x4 NVMe SSDs, drawing only the power the drive itself needs. Silent operation is guaranteed because no moving parts are present.
Under continuous load the card maintains up to 32 Gbps on PCIe 3.0 and 64 Gbps on PCIe 4.0, limited by the installed SSD. The passive design has no thermal throttling mechanism beyond the metal tray, so very high-end drives may throttle in tight cases. Builders who need active cooling or multiple drive bays should look elsewhere.
| Brand | Athena Power |
|---|---|
| Series | M2U2 Series |
| Model | M.2 SSD Adapter |
| Part Number | SP-M21NVME |
| Color | Black / Silver |
| Size | M.2 |
| Type | Enclosure |
| AC Adapter | No |
| Material | Metal |
| Internal Interface | M.2 NVME M-Key |
| External Interface | No |
| HDD Count Supported | Single NVMe SSD |
| Maximum Capacity (per Bay) | 1 |
| Fan | No |
| Dimensions | 6x5x1167.3mm x 120.8mm x 19mm [Full height bracket]/167.3mm x 84mm x 19mm [Low profile bracket |
| Weight | 141.8 g |
Insert the M.2 NVMe M-key SSD (2230, 2242, 2260 or 2280) into the tray, secure it with the screw, attach the chosen full-height (120.8 mm) or low-profile (84 mm) bracket to the backplane cage, then plug the x4 card into a PCIe 3.0/4.0 x4 slot. The step people miss is swapping the bracket before mounting the card.
The adapter has no fan or moving parts, so it requires no routine maintenance. Only the installed M.2 NVMe SSD may need replacement if it reaches its write endurance limit. The anti-vibration springs and metal cage are fixed and not serviceable.
The electrical ceiling is the PCIe 3.0 x4 limit of 32 Gbps or PCIe 4.0 x4 limit of 64 Gbps, whichever your platform supports. Because there is no active cooling, the SSD itself will throttle before the adapter reaches any other bottleneck.
Også i denne avdelingen
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Det du betaler med, og det du ser prisene i.
Sendes fra lommeboken din i kassen
Kun visning — katalogen er prissatt i USD
Fant ingen valuta.
Velg språket nettstedet snakker til deg på.
Ny her?
Har du allerede en konto?
Det finnes ingen automatisk tilbakestilling: butikken sender ikke e-post, så det finnes ingen engangslenke å be om. La adressen stå på kontoen, så blir den behandlet manuelt.
Forespørsel registrert
Ingenting er på vei til innboksen din — butikken sender ingen e-post i det hele tatt. Noen behandler dette manuelt.
Husket du det likevel?