Brute Networks
Brute Networks 726718-S21-BN 8GB DDR4 2133 1Rx4 Registered server RAM
8GB DDR4 2133 MHz registered ECC RDIMM with CL15 latency and 1.2 V operation for HP servers
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 8GB capacity expands server memory headroom
- DDR4-2133 speed matches PC4-17000 system bus
- Registered design with ECC protects data integrity
- 20V operation reduces power draw per module
- HP 726718-S21 equivalent ensures drop-in compatibility
HP-compatible 8GB DDR4 server module
This 8GB DDR4 registered DIMM is built for HP servers that require PC4-17000 memory at 2133 MT/s. It uses a 1Rx4 layout, operates at 1.20 V and includes ECC with a CL15 latency. The 288-pin module suits administrators expanding capacity in supported HP platforms.
Sustained-load behaviour
Registered buffering and ECC keep data integrity stable during continuous workloads such as virtualisation or database serving. The major-brand DRAM chips (Samsung, SK Hynix or Micron) are validated for 100 % compatibility, so error correction and signal quality remain consistent over long periods rather than only in short bursts.
Pre-order checklist
Verify that your HP server accepts DDR4 registered RDIMMs at the PC4-17000 speed grade and that the memory slots support 1Rx4 organisation. Confirm the system BIOS recognises 1.20 V modules and that you are not mixing registered and unbuffered DIMMs in the same channel.
Høydepunkter
- 8GB capacity expands server memory headroom
- DDR4-2133 speed matches PC4-17000 system bus
- Registered design with ECC protects data integrity
- 20V operation reduces power draw per module
- HP 726718-S21 equivalent ensures drop-in compatibility
Spesifikasjoner
| Brand | HP |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
Spørsmål om denne varen
How much heat and power does the 8GB DDR4-2133 1.20V registered module generate when running continuously?
The module operates at 1.20V, the standard low voltage for DDR4, which keeps power draw and heat output modest even in a fully populated server running all day.
What server slot and memory controller features are required for this 288-pin DDR4 RDIMM to work?
The module needs a DDR4 RDIMM slot with registered memory support and ECC capability; it is built to HP 726718-S21 specifications for direct compatibility.
Will this PC4-17000 CL15 1Rx4 stick work alongside older DDR4 modules at different speeds or ranks in the same HP server?
It will run at the lowest common speed and voltage across all populated slots; mixing ranks or speeds is supported by the memory controller but may reduce overall bandwidth.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.



