Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Silver 2.5 inch SAS hard drive with label showing 1.2TB capacity

DELL

DELL 1.2TB 10K 2.5" SAS HDD T6TWN internal hard drive

SKU CH-CM62-H2GZZ

A 1.2TB 10K SAS hard drive in a 2.5-inch form factor for server storage

  • 2 TB capacity for data-intensive workloads
  • 10K RPM spindle speed accelerates read and write performance
  • SAS interface delivers reliable enterprise connectivity
  • 5 inch form factor fits dense server chassis
  • 600 GB per platter design increases storage density

Dell 1.2 TB SAS drive for servers

This 2.5 inch internal hard drive provides 1.2 TB of storage with a SAS interface. It spins at 10K RPM and carries the Dell part number T6TWN. The unit is supplied new in OEM or retail packaging.

Suits arrays needing SAS 2.5 inch bays

It fits servers and storage arrays that accept 2.5 inch SAS drives and require 1.2 TB capacity. Buyers needing SATA-only connectivity or larger capacities should look at other models.

10K RPM spindle speed

The 10K rotational speed determines the drive's sustained throughput and access latency for transactional workloads. Verify that your controller and backplane support this spindle rate before purchase.

Høydepunkter

  • 2 TB capacity for data-intensive workloads
  • 10K RPM spindle speed accelerates read and write performance
  • SAS interface delivers reliable enterprise connectivity
  • 5 inch form factor fits dense server chassis
  • 600 GB per platter design increases storage density

Spesifikasjoner

Ingen publiserte spesifikasjoner for denne varen ennå.

Spørsmål om denne varen

How do I install this 2.5" SAS drive in a desktop that only has 3.5" bays and SATA ports?

You need a 2.5" to 3.5" mounting bracket and a SAS-compatible controller; a standard SATA port will not communicate with the SAS interface.

What part of this 10K RPM drive is most likely to wear out first after years of operation?

The mechanical spindle motor and actuator bearings in the 10K RPM mechanism typically reach end-of-life before the magnetic media.

At what point does the 600 MB/s SAS interface stop being the bottleneck during sustained sequential transfers?

The 10K RPM platters usually saturate well below the 600 MB/s interface ceiling, so the drive's internal media speed becomes the limit first.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.