Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Bare 3.5-inch internal hard drive with SAS connector

DELL

DELL 400-ALNY 4TB 7200 RPM SAS 12Gb/s 3.5" internal hard drive

SKU CH-1PDE-HQAY4 MPN 400-ALNY

A 4 TB 3.5" internal hard drive spinning at 7200 RPM with a SAS 12Gb/s interface for fast data access

  • PackagingBare Drive
  • InterfaceSAS
  • Capacity4TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Form Factor3.5"
  • 4 TB capacity expands server storage
  • 7200 RPM spindle speed enables fast data access
  • SAS 12 Gb/s interface delivers high transfer rates
  • 5 inch hot-plug form factor fits PowerEdge bays
  • Compatible with Dell PowerEdge R430 R530 T430

Dell 4TB SAS 12Gb/s Hard Drive

This Dell 400-ALNY is a 4TB internal hard drive spinning at 7200 RPM with a SAS 12Gb/s interface in a 3.5 inch form factor. It is built for Dell PowerEdge servers including the R430, R530 and T430. The drive uses a 512n sector format and supports hot-plug installation for straightforward capacity expansion.

Suits Servers Needing Hot-Plug SAS Storage

This drive suits administrators adding nearline capacity to compatible Dell PowerEdge servers that accept 3.5 inch SAS hot-plug drives. It is not for systems limited to 2.5 inch drive bays, nor for platforms requiring a different interface protocol or sector size than 512n. Buyers without a SAS backplane or controller should look elsewhere.

SAS 12Gb/s Interface Decides Compatibility

The single specification that decides fit is the SAS 12Gb/s interface combined with 3.5 inch hot-plug mechanics. Your server backplane and RAID controller must support this exact interface standard and form factor. Verify the system service manual for the R430, R530 or T430 to confirm the drive is listed as a supported part before purchase.

Høydepunkter

  • 4 TB capacity expands server storage
  • 7200 RPM spindle speed enables fast data access
  • SAS 12 Gb/s interface delivers high transfer rates
  • 5 inch hot-plug form factor fits PowerEdge bays
  • Compatible with Dell PowerEdge R430 R530 T430

Spesifikasjoner

BrandDell
Model400-ALNY
PackagingBare Drive
InterfaceSAS
Capacity4TB
RPM7200 RPM
Average Latency12Gb/s
Form Factor3.5"
Fraktvekt1.36 kg
Pakkestørrelse279 × 140 × 89 mm

Spørsmål om denne varen

Will this 12Gb/s SAS drive work with the 6Gb/s SAS backplane in my older PowerEdge server?

The drive uses a 12Gb/s SAS interface and is hot-pluggable. It will negotiate down to the backplane speed, so it functions in a 6Gb/s SAS environment.

How can I verify the 7200 RPM spindle speed is active after installation?

Check the drive properties in the RAID controller BIOS or OS disk utility; the reported spindle speed should read 7200 RPM.

The listing says bare drive — does the package include a 3.5" hot-plug caddy or mounting screws for a PowerEdge R430?

It ships as a bare 3.5" drive only. The hot-plug caddy and any mounting hardware must be sourced separately for the R430, R530 or T430.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.