Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Four red DDR3 modules with heat spreaders

G.SKILL

G.SKILL F3-14900CL10Q-32GBZL 32GB (4×8GB) DDR3 1866 CL10 desktop RAM

SKU CH-265Z-CYCZB MPN F3-14900CL10Q-32GBZL

32 GB quad-channel DDR3 kit at 1866 MT/s with CL10 timing and 1.5 V operation

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL10
  • Timing10-11-10-30
  • Voltage1.50V
  • ECCNo
  • 32 GB capacity across four 8 GB modules for heavy multitasking
  • DDR3 1866 speed rated at PC3 14900 for fast data throughput
  • CL10 10-11-10-30 timings deliver low-latency response
  • 50 V operation with Intel XMP support for simple overclocking
  • Red heat spreaders on each module maintain thermal stability

Ripjaws Z DDR3 1866 quad-channel kit

This G.SKILL Ripjaws Z Series kit provides 32GB of DDR3 memory across four 8GB modules. It is designed for Intel LGA2011 and X79 platforms and also works with LGA1155 and AMD Llano or AM3+ systems. The quad-channel layout suits workstations and high-end desktops that need large memory capacity for multitasking.

DDR3 1866 speed and timing limits

The modules run at DDR3 1866 (PC3 14900) with timings of 10-11-10-30 and CAS latency 10 at 1.5V. Unbuffered non-ECC operation is standard for consumer desktop platforms. Intel XMP profiles are supported for 2nd and 3rd Generation Intel Core processors to simplify configuration in the BIOS.

Red heat spreader on unbuffered DIMMs

Each module carries a red heat spreader that helps manage thermals during overclocking or sustained loads. The standard unbuffered DIMM form factor fits typical desktop motherboard slots without extra clearance concerns. Quad-channel population uses four slots so builders should verify their board has enough free sockets.

Høydepunkter

  • 32 GB capacity across four 8 GB modules for heavy multitasking
  • DDR3 1866 speed rated at PC3 14900 for fast data throughput
  • CL10 10-11-10-30 timings deliver low-latency response
  • 50 V operation with Intel XMP support for simple overclocking
  • Red heat spreaders on each module maintain thermal stability

Spesifikasjoner

BrandG.SKILL
SeriesRipjaws Z Series
ModelF3-14900CL10Q-32GBZL
Capacity32GB (4 x 8GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL10
Timing10-11-10-30
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ColorRed
Heat SpreaderYes
FeaturesQuad channel memory designed for Intel LGA2011 and X79 systems
Compatible with Intel LGA1155 and AMD Llano/AM3+ platforms
Intel XMP support for 2nd and 3rd Generation Intel Core Processors
Fraktvekt0.23 kg
Pakkestørrelse204 × 136 × 22 mm

Spørsmål om denne varen

Should I choose the 32GB quad-channel kit or look for a different capacity?

This kit provides 32GB total across four 8GB modules in a matched quad-channel set, which is the only capacity offered for this model.

What does the 1866 speed rating deliver once installed?

The modules run at DDR3 1866 (PC3 14900) with timings of 10-11-10-30 at 1.5V, giving the rated frequency and latency when XMP is enabled.

How does the XMP support work with my Intel platform?

Intel XMP profiles let you load the 1866 CL10 settings in the BIOS on compatible LGA2011 X79 or LGA1155 systems without manual tuning.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.