Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two green DDR3 sticks side by side, 240-pin desktop memory kit

GeIL

GeIL GG38GB1333C9DC 8GB DDR3 1333MHz CL9 1.35V 2x4GB desktop RAM

SKU CH-Q3TD-2Q1D7 MPN GG38GB1333C9DC

Dual-channel kit of two 4 GB DDR3 modules running at 1333 MHz with CL9 timings at 1.35 V

  • Lower power draw with 1.35V operation
  • 8GB total capacity from two 4GB modules
  • 1333MHz DDR3 speed for responsive performance
  • CL9 9-9-9-24 timings for stable operation
  • Die-hard Burn-in Technology validates reliability

Green Series DDR3 upgrade kit

This GeIL Green Series kit supplies 8 GB of DDR3 memory in a dual-channel pair of two 4 GB modules. It runs at 1333 MHz with CL9 timings of 9-9-9-24 and operates at a reduced 1.35 V. The unbuffered, non-ECC DIMMs use 240-pin DDR3 SDRAM technology and are suited for desktop systems that support the PC3-10660 standard.

Replaces higher-voltage DDR3 kits

The kit replaces older DDR3 modules that require 1.5 V, lowering power draw and heat output while keeping the same 1333 MHz speed and CL9 latency. The jump is worthwhile when a motherboard and CPU officially support 1.35 V operation, allowing the memory to run at its rated voltage without manual adjustment. It is not for systems that only accept 1.5 V DDR3 or that need registered or ECC memory.

Straightforward 240-pin installation

Each module fits a standard 240-pin DDR3 slot and the dual-channel kit is designed to populate matching motherboard slots for dual-channel mode. The double-sided 4 GB density is compatible with most desktop boards that accept unbuffered DDR3. Problems usually arise when the BIOS defaults to 1.5 V, so the voltage must be set to 1.35 V in firmware for stable operation.

Høydepunkter

  • Lower power draw with 1.35V operation
  • 8GB total capacity from two 4GB modules
  • 1333MHz DDR3 speed for responsive performance
  • CL9 9-9-9-24 timings for stable operation
  • Die-hard Burn-in Technology validates reliability

Spesifikasjoner

Ingen publiserte spesifikasjoner for denne varen ennå.

Spørsmål om denne varen

Does this kit use standard 240-pin DDR3 slots?

Yes, each 4 GB module is a 240-pin DDR3 DIMM that fits any desktop DDR3 socket keyed for 1.35 V operation.

What BIOS setting is often missed when installing these low-voltage sticks?

Many boards default to 1.5 V; you must enable the XMP profile or manually set DRAM voltage to 1.35 V so the kit runs at its rated 1333 MHz CL9 9-9-9-24 timings.

Will the heatspreaders ever need replacement or re-pasting?

The modules use GeIL's Die-hard Burn-in Technology with no active cooling; there is no thermal paste or removable spreader to service, so no maintenance is required.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.