Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Three white 120mm square fans with thick 30mm frames and double-sided ARGB lighting

Geometric Future

Geometric Future Squama 3003R-12 Reverse Blade 30mm White 3-Pack case fan

SKU CH-4YND-4EG9G

Three 120 mm fans with 30 mm thick frames, reverse blades, double-sided ARGB and hydro bearings deliver 76 CFM at up to 2250 RPM

  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness30mm
  • Bearing TypeHydro Bearing
  • RPM800~2250 RPM
  • Air Flow76 CFM

Color White

Model Squama 3003R / 120x30mm Reverse

Option 3 Packs

  • Double-sided ARGB lighting on both fan faces
  • 30 mm thick frame boosts static pressure to 2.3 mmH2O
  • Hydro dynamic bearing cuts vibration at up to 2250 RPM
  • PWM range 800–2250 RPM balances airflow and 36.4 dBA noise
  • 76 CFM airflow from nine reverse-curve blades cools radiators and cases

30mm Reverse-Blade ARGB Fan Trio

These 120 mm case fans use a 30 mm thick frame and reverse blade orientation to push air through restrictive radiators or dense mesh. The three-pack suits builders who want matched airflow and lighting across intake, exhaust or radiator positions. White finish and addressable RGB on both sides coordinate with modern showcase builds.

5V ARGB Sync and PWM Limits

Lighting requires a motherboard 5 V 3-pin ARGB header; older 12 V 4-pin RGB headers will not work. PWM control operates between 800 and 2250 RPM, so the fans cannot spin below 800 RPM for near-silent idle or exceed 2250 RPM for extreme static pressure.

30mm Thickness Clearance Check

The 30 mm frame is 5 mm thicker than standard 25 mm fans and will not fit in cases, radiators or GPU shrouds limited to the slimmer profile. Buyers must verify that their hardware accepts 30 mm fans before purchase.

Høydepunkter

  • Double-sided ARGB lighting on both fan faces
  • 30 mm thick frame boosts static pressure to 2.3 mmH2O
  • Hydro dynamic bearing cuts vibration at up to 2250 RPM
  • PWM range 800–2250 RPM balances airflow and 36.4 dBA noise
  • 76 CFM airflow from nine reverse-curve blades cools radiators and cases

Spesifikasjoner

BrandGeometric Future
SeriesSquama 3003-12
TypeCase Fan
CompatibilityCase
Fan Thickness30mm
Bearing TypeHydro Bearing
RPM800~2250 RPM
Air Flow76 CFM
Air Pressure2.3 mmH2O
Noise Level36.4 dBA
Power Connector4 Pin
ColorWhite
LEDAddressable RGB
Dimensions120 x 120 x 30 mm

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Should I pick the 30 mm thick version or a standard 25 mm fan for my radiator?

The 30 mm frame gives stronger static pressure of 2.3 mmH2O and 76 CFM airflow, making it better suited for dense radiators than thinner 25 mm fans.

What does the 2250 RPM top speed actually deliver inside a case?

At 2250 RPM the fan moves 76 CFM with 2.3 mmH2O pressure while peaking at 36.4 dBA, so you get strong airflow through filters or radiators without excessive noise.

Does the 4-pin PWM connector work with standard motherboard headers and 5 V ARGB sync?

Yes, the 4-pin PWM header provides automatic 800-2250 RPM control, and the addressable RGB lighting connects to a 5 V 3-pin ARGB header for motherboard synchronisation.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.