Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Rectangular laser engraver with 3.5-inch color touchscreen, open frame, metal finish, air assist nozzle attached

LONGER

LONGER RAY5 5W Laser Engraver with Air Assist Kit

SKU CH-4JAT-Y24ZG

A 5 W laser engraver with a 0.08 mm dot, 3.5-inch touch screen, Wi-Fi control and a 15.7-inch square work area for wood, metal and glass

  • TypeLaser Engraver & Cutter
  • Ultra-fine 0.08 mm laser dot enables precise engraving and cutting
  • 10000 mm/min engraving speed completes projects quickly
  • 5-inch colour touch screen allows offline operation via TF card
  • 240 MHz ESP32 chipset with Wi-Fi supports web and app control
  • 7 x 15.7 inch work area accommodates large material pieces

Laser engraver with 15.7 inch work area

The LONGER RAY5 is a desktop laser engraver and cutter designed for hobbyists and makers who want to mark or cut wood, glass and metal. It delivers a 0.08 by 0.08 mm laser dot for fine detail at speeds up to 10000 mm per minute. A 3.5 inch colour touch screen and built-in controller allow offline operation from a TF card without a computer connection.

Check power supply and ventilation before use

The machine requires a stable mains connection for its safety systems including thermal protection and current control. Ensure your workspace has adequate airflow for fumes produced when cutting or engraving materials such as wood or acrylic. A flat, level surface large enough for the 15.7 inch square frame is also necessary for accurate results.

Rigid frame with air assist and Wi-Fi control

The engraver features a 32-bit ESP32 chipset running at 240 MHz for responsive motion control. An air assist kit is included to improve cut quality and reduce residue on the workpiece. Wi-Fi connectivity lets you send jobs from a web interface or mobile app, while the colour touch screen provides direct access to files stored on the TF card.

Høydepunkter

  • Ultra-fine 0.08 mm laser dot enables precise engraving and cutting
  • 10000 mm/min engraving speed completes projects quickly
  • 5-inch colour touch screen allows offline operation via TF card
  • 240 MHz ESP32 chipset with Wi-Fi supports web and app control
  • 7 x 15.7 inch work area accommodates large material pieces

Spesifikasjoner

TypeLaser Engraver & Cutter

Spørsmål om denne varen

What comes in the box and do I need to buy anything extra to start engraving?

The kit includes the RAY5 5 W laser engraver with built-in air assist, a 3.5-inch colour touch screen, and a TF card slot for offline files. No computer connection is required, so you can begin once you have a design saved to a TF card.

Which version or capacity should I choose for the engraving area?

The machine provides a fixed 15.7 x 15.7 inch work area; there are no alternative sizes or capacity options listed for this model.

What does the 10000 mm/min engraving speed mean in practice?

It is the maximum traverse rate the 0.08 x 0.08 mm laser dot can achieve, allowing detailed cuts and engravings on metal, glass, and wood to finish quickly when the design and material settings permit.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.