Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
3.5 inch IPS touch display module with microSD slot and pin header for Raspberry Pi Pico

LORDWORLD

LORDWORLD 3.5inch Touch Display Module 480×320 65K Colors

SKU CH-KS53-CPG2J

A 3.5 inch IPS touch display with 480×320 resolution and 65K colours, resistive XPT2046 controller, microSD slot and direct Pico header for SPI projects

  • Clear 3.5 inch IPS visuals with 480×320 resolution
  • Smooth resistive touch via dedicated XPT2046 controller
  • Built-in MicroSD slot for direct image display
  • Programmable backlight control saves power
  • Ready-to-use female header fits Raspberry Pi Pico directly

Compact Touch Display for Pi Pico

This 3.5 inch module adds a 480×320 IPS panel with 65K colours to a Raspberry Pi Pico. A resistive controller XPT2046 and ILI9488 driver run over the SPI bus. An onboard female header plugs straight onto the Pico without extra wiring.

Makers needing a small colour touchscreen

Suits hobbyists building portable instruments, data loggers or simple GUIs on a Pico. Not for projects that require capacitive multi-touch, larger screen area or higher pixel density than 480×320.

SPI interface decides compatibility

The display communicates solely through the Pico SPI pins, so any host must expose that bus and run the supplied C/C++ or MicroPython libraries. Without SPI the module cannot function.

Høydepunkter

  • Clear 3.5 inch IPS visuals with 480×320 resolution
  • Smooth resistive touch via dedicated XPT2046 controller
  • Built-in MicroSD slot for direct image display
  • Programmable backlight control saves power
  • Ready-to-use female header fits Raspberry Pi Pico directly

Spesifikasjoner

BrandLORDWORLD

Spørsmål om denne varen

Which Raspberry Pi Pico board do I need to plug this 3.5inch display into?

The module has an onboard female pin header that connects directly to any Raspberry Pi Pico series board.

Can I keep using the resistive touch controller XPT2046 if I add other SPI peripherals?

The display communicates over the SPI bus, so additional SPI devices can share the bus with separate chip-select lines.

How do I verify the ILI9488 driver is rendering 480×320 pixels at 65K colours after wiring it up?

Run the supplied MicroPython or C/C++ example; the screen should show a full-colour test pattern without artefacts.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.