Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
White and black braided PSU cable extension kit with 24-pin, CPU and GPU connectors and combs

myVolts

myVolts PSU cable extension kit 24-pin 2×CPU 3×GPU 30cm 17 colours 18AWG 15 combs

SKU CH-T3K7-QWV19

A 30cm sleeved extension kit with 24-pin, two CPU and three GPU cables, 18AWG wire, 15 combs and 17 colour choices

  • TypeAT
  • Complete 24-pin, dual CPU and triple GPU extensions in one kit
  • 17 colour choices let you match any build theme
  • 18AWG UL 1015 tinned copper handles heat and humidity reliably
  • High-density braided sleeves stay flexible for clean routing
  • 15 combs included for precise cable alignment

Cable extension kit for modular PSUs

This kit bundles a 24-pin motherboard extension, two 4+4-pin CPU extensions and three 6+2-pin GPU extensions in a single package. It is intended for builders using a modular power supply who want to route longer, coloured cables behind the motherboard tray for a cleaner look. The 300 mm length suits mid-tower and larger cases where stock cables fall short.

Installation notes and common issues

Each cable uses 18 AWG UL 1015 tinned copper wire inside a high-density braided sleeve that stays flexible during routing. The set includes fifteen 8-pin combs and three 24-pin combs to align wires neatly, but the cables do not arrive pre-curved so they must be trained by hand. A frequent mistake is forcing a tight bend before the sleeve has settled, which can kink the braid and stress the pins.

Behaviour under sustained load

The 18 AWG conductors and UL 1015 insulation are rated for higher temperature and humidity resistance than thinner alternatives, keeping voltage drop low during extended gaming or render sessions. The dense braid resists abrasion when cables rub against case edges over months of use. Builders who need longer runs than 300 mm or more than three GPU connectors will find this kit insufficient.

Høydepunkter

  • Complete 24-pin, dual CPU and triple GPU extensions in one kit
  • 17 colour choices let you match any build theme
  • 18AWG UL 1015 tinned copper handles heat and humidity reliably
  • High-density braided sleeves stay flexible for clean routing
  • 15 combs included for precise cable alignment

Spesifikasjoner

TypeAT

Spørsmål om denne varen

How can I confirm the 24-pin ATX, dual 4+4-pin CPU and triple 6+2-pin GPU extensions are seated correctly after routing?

Verify each connector clicks fully into its matching socket on the motherboard, CPU power headers and graphics card, then check that all 15 supplied combs hold the 18AWG wires in a tidy, strain-free path.

Which cables and combs are included and what must I supply myself?

The kit provides one 24-pin ATX extension, two 4+4-pin CPU extensions, three 6+2-pin GPU extensions, three 24-pin combs and fifteen 8-pin combs; you only need a compatible modular power supply to plug them into.

Should I choose the 30 cm or 50 cm length for a standard mid-tower build?

The 30 cm length suits most mid-tower cases and keeps the high-density sleeving neat, while the 50 cm option adds reach for larger chassis or rear-routing layouts.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.