Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

NEMIX RAM

NEMIX RAM 1.5TB DDR5 4800 ECC RDIMM 16x96GB CL40 1.1V 2Rx4 Supermicro H14DSG-OD memory upgrade

SKU CH-ZGDH-8C4BA

1.5 TB DDR5 4800 registered ECC RDIMM kit, 16 modules of 96 GB each at CL40 and 1.1 V, validated for the Supermicro H14DSG-OD motherboard

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 5 TB capacity from 16 modules of 96 GB each
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the memory controller specification
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD motherboard

Exact-match DDR5 RDIMM kit

This 1.5TB kit contains sixteen 96GB DDR5-4800 registered ECC RDIMMs built to the PC5-38400 standard. It targets administrators upgrading a Supermicro H14DSG-OD server who need the full supported capacity in a single validated package.

For fully populated enterprise servers

The modules suit workloads that require registered ECC memory with 2Rx4 organisation and 1.10V operation across every slot. Builders using consumer motherboards, UDIMM-only platforms, or systems that cannot address this density should look at something else.

1.5TB at rated speed and voltage

At CL40 the kit delivers the board's maximum supported capacity and runs at 4800MT/s without manual tuning. Headroom ends when the platform's memory-controller limits or slot count prevent adding further modules beyond the sixteen supplied.

Høydepunkter

  • 5 TB capacity from 16 modules of 96 GB each
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the memory controller specification
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD motherboard

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Does the Supermicro H14DSG-OD motherboard have 16 DDR5 RDIMM slots to accept this full 1.5 TB kit?

The H14DSG-OD provides exactly 16 DDR5 RDIMM slots, so the 16-module kit fills every socket and the memory controller sees the full 1.5 TB capacity at DDR5-4800.

Can I mix these 96 GB 2Rx4 Registered ECC modules with smaller DDR5 RDIMMs already installed in the same server?

Mixing different capacities or ranks is not supported; the board's population rules require identical 2Rx4 Registered ECC DIMMs in every populated channel for stable operation at 4800 MT/s.

How do I confirm the kit is running at DDR5-4800 CL40 1.1 V with ECC active after installation?

Enter the BIOS or use a tool such as ipmitool / dmidecode; each DIMM should report 4800 MT/s, CAS 40, 1.1 V, Registered ECC type, and the total recognised capacity should read 1.5 TB.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.