BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278589BTC
På lager
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 1.2V 288-Pin UDIMM for THINKMATE GPX-WS-540X1 memory upgrade
16 GB DDR4-3200 dual-channel kit with CL22 timing for the Thinkmate GPX-WS-540X1 workstation
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts workstation responsiveness
- DDR4 3200 speed with CL22 latency supports demanding workloads
- 2 V operation reduces power draw and heat
- 288-pin UDIMM form factor fits THINKMATE GPX-WS-540X1 exactly
- Major-brand Samsung, Micron or Hynix chips ensure stability
ThinkMate GPX-WS-540X1 compatible kit
This 16 GB kit contains two 8 GB DDR4 modules built for the ThinkMate GPX-WS-540X1 workstation. The 288-pin UDIMMs run at 3200 MT/s with CL22 latency and 1.20 V operation. Non-ECC unbuffered design matches the platform requirements exactly.
Standard voltage keeps thermals low
Operating at 1.2 V reduces heat output compared to higher-voltage DDR4 kits. No heat spreader is fitted, so airflow across the bare PCB handles cooling in typical workstation chassis. Power draw stays within standard UDIMM limits for this speed grade.
Replaces slower or smaller DDR4 memory
Upgrading from lower-capacity or lower-frequency DDR4 modules adds bandwidth for multi-threaded workloads. The jump is worthwhile when the workstation runs memory-intensive applications and the board has free slots. Not suited for systems that require ECC or registered DIMMs.
Høydepunkter
- 16 GB dual-channel kit boosts workstation responsiveness
- DDR4 3200 speed with CL22 latency supports demanding workloads
- 2 V operation reduces power draw and heat
- 288-pin UDIMM form factor fits THINKMATE GPX-WS-540X1 exactly
- Major-brand Samsung, Micron or Hynix chips ensure stability
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Spørsmål om denne varen
How do I install the 288‑pin DDR4 UDIMM modules in the THINKMATE GPX‑WS‑540X1, and what step is often missed?
Power off the workstation, open the chassis, align each module’s notch with the slot key, press firmly until both retention clips click, then verify in BIOS that both 8 GB sticks are recognised at 3200 MT/s.
What maintenance or replacement will this 16 GB kit need over time?
No scheduled maintenance is required; the modules have no heat spreaders and run at 1.20 V. Replace only if a stick fails or you need more than 16 GB total capacity.
What limit appears first when the GPX‑WS‑540X1 runs sustained workloads with this CL22 memory?
The CAS latency of 22 cycles at 3200 MT/s sets the baseline response time; under heavy sustained loads the memory controller’s throughput ceiling is reached before thermal or voltage limits.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00281181BTC
På lager
