Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Four green DDR5 RDIMM modules without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM 192GB (4×48GB) DDR5 4800 CL40 2Rx8 1.1V ECC RDIMM Supermicro H13SSH-E memory upgrade

SKU CH-8DHH-QSRMB

A 192GB DDR5-4800 registered ECC kit of four 48GB modules at CL40 and 1.1V, validated for the Supermicro H13SSH-E motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Vis 30 flere konfigurasjoner
  • 192 GB total capacity from four 48 GB modules
  • DDR5 4800 MT/s speed with CL40 latency
  • Registered ECC design prevents data corruption
  • 2Rx8 organisation at 1.10 V matches server spec
  • 288-pin RDIMM form factor fits Supermicro H13SSH-E

192GB DDR5 ECC RDIMM kit for Supermicro H13SSH-E

This 192GB kit contains four 48GB DDR5 4800 RDIMM modules rated at CL40 and 1.1V. The registered ECC design with 2Rx8 organisation matches the memory controller requirements of the Supermicro H13SSH-E motherboard so the system recognises the full capacity at rated speed.

Who this suits and who should look elsewhere

Server administrators upgrading a Supermicro H13SSH-E platform to the maximum supported registered ECC capacity will find the exact rank, voltage and timing the board expects. Builders needing unbuffered UDIMMs, SODIMM form factors, non-ECC memory or speeds beyond DDR5 4800 cannot use this kit.

What to verify before ordering

Confirm the motherboard manual approves a four-module 2Rx8 population at DDR5 4800 and lists the required DIMM installation order. Check that the BIOS revision installed on your H13SSH-E supports 48GB density registered DIMMs and that the chassis provides 288-pin RDIMM clearance.

Høydepunkter

  • 192 GB total capacity from four 48 GB modules
  • DDR5 4800 MT/s speed with CL40 latency
  • Registered ECC design prevents data corruption
  • 2Rx8 organisation at 1.10 V matches server spec
  • 288-pin RDIMM form factor fits Supermicro H13SSH-E

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will my Supermicro H13SSH-E motherboard accept this 288-pin DDR5 RDIMM kit?

Yes, the kit is verified for the H13SSH-E. The board requires 288-pin registered DDR5 modules and this 192 GB kit matches that exact form factor.

Can I mix these 48 GB 2Rx8 modules with smaller DDR5 RDIMMs I already own?

Mixing ranks or capacities is possible only if the motherboard manual approves the specific population order; otherwise the system may not train at 4800 MT/s.

How do I confirm the server sees all 192 GB at 4800 MT/s after installation?

Enter BIOS and check the memory information screen — it should report 192 GB total, DDR5-4800 speed, CL40 timings and ECC active.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.