BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278351BTC
På lager
NEMIX RAM
NEMIX RAM 192GB 4X48GB DDR5 6400MHz PC5-51200 CL52 1.1V 2Rx8 288-PIN ECC Registered RDIMM memory upgrade
A 192 GB server memory kit with four 48 GB DDR5-6400 Registered ECC modules at 1.1 V and CL52, validated for the Supermicro H14SHM motherboard
- Capacity192GB (4 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity from four 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated bandwidth out of the box
- Registered ECC design corrects single-bit errors and stabilises fully populated channels
- 1 V operation matches the memory controller specification for reliable recognition
- 288-pin RDIMM form factor verified for Supermicro H14SHM motherboard compatibility
Server Memory Kit
This 192GB kit contains four 48GB DDR5 RDIMM modules rated at 6400MHz with CL52 latency and 1.1V operation. It is built for administrators upgrading a Supermicro H14SHM motherboard that requires registered ECC memory in a 288-pin form factor.
Thermals and Power
Each module runs at the standard 1.10V DDR5 voltage without a heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, keeping power draw predictable when all slots are populated.
Registered ECC Architecture
The 2Rx8 registered ECC design is the single specification that determines compatibility; the board must support registered DIMMs and the exact rank configuration to recognise the full 192GB capacity at rated speed. Buyers whose systems require unbuffered UDIMMs or a different rank layout cannot use this kit.
Høydepunkter
- 192 GB total capacity from four 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated bandwidth out of the box
- Registered ECC design corrects single-bit errors and stabilises fully populated channels
- 1 V operation matches the memory controller specification for reliable recognition
- 288-pin RDIMM form factor verified for Supermicro H14SHM motherboard compatibility
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 4X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Spørsmål om denne varen
How do I install the 288-pin DDR5 RDIMM kit on the Supermicro H14SHM motherboard and what population step is often missed?
Power down, open the chassis, and insert each 48GB module into the slots specified by the H14SHM manual in the exact population order; the step most often missed is following that board-specific sequence rather than simply filling every slot.
What maintenance or replacement will the 192GB ECC registered kit need during its service life?
No scheduled maintenance is required; the modules carry a lifetime replacement warranty, so a DIMM is only swapped if ECC logs report an uncorrectable error or the server fails to recognise the full 192GB at POST.
What limit appears first when the 48GB 2Rx8 DDR5-6400 modules run sustained workloads at 1.1V?
The registered buffer and ECC logic keep every slot stable at the rated CL52 timing, so the first practical ceiling is the motherboard's maximum supported capacity rather than thermal or voltage throttling.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
