BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277053BTC
På lager
NEMIX RAM
NEMIX RAM 32GB DDR5 4800 CL40 1.1V 2Rx8 UDIMM HP Z2 G9 memory upgrade
Adds 32 GB of DDR5 4800 CL40 1.1 V 2Rx8 UDIMM memory to the HP Z2 G9 workstation
- Capacity32GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB capacity expands workstation memory for large datasets
- DDR5 4800 MT/s speed increases data throughput for demanding applications
- CL40 latency at 1.1 V balances responsive timing with efficient power use
- 2Rx8 dual-rank organisation improves memory controller efficiency on compatible HP Z2 G9 systems
- 288-pin UDIMM form factor enables straightforward installation in supported desktop workstations
HP Z2 G9 DDR5 upgrade
This 32GB DDR5 module is built for the HP Z2 G9 tower workstation. It delivers a single 32GB stick of non-ECC unbuffered memory that plugs directly into a 288-pin slot. The unit runs at 4800MHz with a CAS latency of CL40 and operates at 1.10V.
Suitable for single-slot capacity boost
Builders expanding an HP Z2 G9 with one module will match the factory speed and voltage. Systems that require ECC registered memory or a lower latency profile should look at a different specification.
4800MHz DDR5 speed rating
The decisive figure is the 4800MHz data rate, listed as PC5-38400, which must match the workstation memory bus. If the platform demands a different DDR5 speed grade, this module will not run at its rated frequency.
Høydepunkter
- 32 GB capacity expands workstation memory for large datasets
- DDR5 4800 MT/s speed increases data throughput for demanding applications
- CL40 latency at 1.1 V balances responsive timing with efficient power use
- 2Rx8 dual-rank organisation improves memory controller efficiency on compatible HP Z2 G9 systems
- 288-pin UDIMM form factor enables straightforward installation in supported desktop workstations
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-328K1 |
| Capacity | 32GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | HPE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM |
Spørsmål om denne varen
Will the 1.1 V operating voltage on this DDR5 module require any cooler or voltage adjustment down the line?
The module runs at 1.1 V with no heat spreader and is designed for standard JEDEC operation, so no extra cooling or voltage tweaks are needed during its service life.
What stops the 4800 MT/s speed from scaling higher if I keep the workstation under load all day?
The CL40 timing and 1.1 V JEDEC limit define the rated 4800 MT/s ceiling; pushing beyond that would exceed the module's validated specification.
How much heat or fan noise does a single 32 GB 2Rx8 stick add when the Z2 G9 runs continuously?
Without a heat spreader the stick relies on case airflow, and at 1.1 V its thermal contribution is minimal, so system fan curves normally stay unchanged.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
