Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green printed circuit board with black memory chips, no heat spreader, 288 gold contacts along the bottom edge

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz ECC UDIMM CL46 1.1V 2Rx8 288-Pin memory upgrade

SKU CH-4ZZD-XNJ44

32 GB DDR5 ECC UDIMM running at 5600 MHz with CL46 latency and 1.1 V for Supermicro X13SAW-TLN4F

  • Capacity32GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

  • 32 GB capacity adds headroom for heavy workloads
  • DDR5 5600 MT/s speed feeds data faster to the CPU
  • ECC protection corrects single-bit errors on the fly
  • 10 V operation keeps power draw low
  • 288-pin UDIMM fits Supermicro X13SAW-TLN4F motherboard

Exact DDR5 ECC UDIMM for Supermicro

This 32 GB DDR5 module runs at 5600 MHz with CL46 latency and 1.1 V operation. It uses an unbuffered 2Rx8 layout on a 288-pin UDIMM form factor. The part is built as a direct match for the Supermicro X13SAW-TLN4F motherboard that requires DDR5 ECC memory.

Sustained error-correcting operation

ECC circuitry detects and corrects single-bit errors continuously during long workloads. Unbuffered topology keeps latency low while the 2Rx8 organisation maintains full rated bandwidth across extended sessions. Stable 1.1 V power draw supports consistent throughput without thermal throttling.

288-pin UDIMM form factor decides fit

Only motherboards that accept DDR5 unbuffered ECC UDIMMs can use this module. RDIMM, SODIMM or non-ECC DDR5 slots will not recognise the part. Verify your board manual for approved population rules before ordering.

Høydepunkter

  • 32 GB capacity adds headroom for heavy workloads
  • DDR5 5600 MT/s speed feeds data faster to the CPU
  • ECC protection corrects single-bit errors on the fly
  • 10 V operation keeps power draw low
  • 288-pin UDIMM fits Supermicro X13SAW-TLN4F motherboard

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K1
Capacity32GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

How much power does the 32GB DDR5 5600MHz ECC UDIMM draw at its 1.1V operating voltage all day?

The module runs at 1.1V, the standard DDR5 voltage, so power draw stays at the low level the memory controller expects for continuous operation.

What motherboard slot and memory type must I already have for this 288-pin DDR5 ECC UDIMM to work?

You need a motherboard with a 288-pin DDR5 UDIMM slot that supports unbuffered ECC memory, such as the Supermicro X13SAW-TLN4F.

Will this 2Rx8 CL46 DDR5 5600MHz kit run stably alongside older DDR5 sticks I keep in the same board?

It is rated for DDR5 5600 CL46 at 1.1V; mixing ranks or timings can force the board to downclock all modules to the slowest common settings.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.