NEMIX RAM
NEMIX RAM 384GB (6x64GB) DDR5 6400MHz CL52 2Rx4 ECC RDIMM Supermicro SYS-122HA-TN-LCC memory upgrade
Six 64 GB DDR5 ECC registered DIMMs running at 6400 MHz CL52 for 384 GB total capacity in the Supermicro SYS-122HA-TN-LCC server
- Capacity384GB (6 x 64GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 384GB total capacity scales server workloads with six 64GB modules
- ECC registered design protects data integrity in critical applications
- DDR5 6400MHz speed delivers high bandwidth for demanding tasks
- 1V operation reduces power draw per module
- 288-pin RDIMM form factor fits Supermicro SYS-122HA-TN-LCC systems
Server memory upgrade
This 384 GB kit supplies six 64 GB DDR5 registered DIMMs built for the Supermicro SYS-122HA-TN-LCC platform. Each module runs at 6400 MHz with a CAS latency of 52 and operates at 1.1 V. The registered ECC design targets data integrity in multi-socket server workloads.
Thermals and power
The modules carry no heat spreader and rely on the chassis airflow typical of 1U and 2U Supermicro systems. At the rated 1.1 V the kit draws minimal power per DIMM, keeping thermal contribution low inside dense configurations. Acoustic impact is limited to the existing system fans.
Sustained load behaviour
Registered buffering and on-die ECC maintain signal quality during continuous memory-intensive tasks such as virtualisation or in-memory databases. The 2Rx4 organisation supports full population of all channels without down-clocking. Buyers needing non-ECC or unbuffered modules for workstation boards should look elsewhere.
Høydepunkter
- 384GB total capacity scales server workloads with six 64GB modules
- ECC registered design protects data integrity in critical applications
- DDR5 6400MHz speed delivers high bandwidth for demanding tasks
- 1V operation reduces power draw per module
- 288-pin RDIMM form factor fits Supermicro SYS-122HA-TN-LCC systems
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K6 |
| Capacity | 384GB (6 x 64GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB (6 x 64GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Spørsmål om denne varen
How do I install the 288-pin DDR5 RDIMM modules in the SYS-122HA-TN-LCC, and which slot-population rule is most often missed?
Power down the server and open the chassis. Align each module's key notch with the slot and press firmly until both ejector clips lock. The step most often missed is following the motherboard's specific population sequence for 2Rx4 registered DIMMs to enable all memory channels.
What maintenance or replacement will the 384GB ECC RDIMM kit require over its service life?
The modules have no heat spreaders and no moving parts, so no scheduled maintenance is needed. ECC corrects single-bit errors on the fly. If a DIMM develops uncorrectable errors, the system logs will flag it and only the affected 64GB module needs replacement.
What is the first limit reached when the 6400MHz CL52 registered memory runs under sustained load?
The registered buffer adds one cycle of latency, so the CL52 timing at 6400MHz becomes the primary latency ceiling before bandwidth saturates. The 1.1V operating voltage also caps headroom for any manual timing adjustments.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.



