BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00280241BTC
På lager
NEMIX RAM
NEMIX RAM 48GB DDR5 5600 CL46 2Rx8 1.1V 288-PIN UDIMM memory upgrade for SuperMicro C9Z890-MW
A 48GB DDR5 UDIMM running at 5600MHz with CL46 latency, built for SuperMicro C9Z890-MW motherboards
- Capacity48GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 48 GB capacity expands workstation memory headroom
- DDR5 5600 speed delivers high throughput for demanding workloads
- CL46 latency supports responsive system operation
- 1 V operation reduces power draw and heat
- Validated for SuperMicro C9Z890-MW motherboard compatibility
Capacity and platform fit
This 48GB DDR5 module is built for the SuperMicro C9Z890-MW motherboard and runs at 5600MT/s with CL46 latency. The 2Rx8 organisation and 1.1V operating voltage match the board's unbuffered non-ECC specification, so the stick drops straight into a compatible DIMM slot without configuration changes.
Build and daily handling
The module uses major OEM chips from Samsung, Micron or Hynix and has no heat spreader, keeping the profile low for tight workstation chassis. A standard 288-pin UDIMM edge connector ensures firm seating and straightforward insertion, while the unbuffered design means no register delay for typical desktop workloads.
Upgrade context and value point
Adding this single 48GB stick expands memory capacity for multi-threaded applications, virtual machines or large datasets that exceed smaller kits. The jump is worthwhile when the platform supports the density and the workload benefits from the extra headroom rather than higher clock speeds.
Høydepunkter
- 48 GB capacity expands workstation memory headroom
- DDR5 5600 speed delivers high throughput for demanding workloads
- CL46 latency supports responsive system operation
- 1 V operation reduces power draw and heat
- Validated for SuperMicro C9Z890-MW motherboard compatibility
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 5600MHZ Non-ECC Unbuffered RAM |
| Part Number | MD44800-4828K1 |
| Capacity | 48GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 48GB (1X48GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM |
Spørsmål om denne varen
What speed does the DDR5 5600 interface actually run at on the SuperMicro C9Z890-MW?
The module is rated for DDR5 5600 (PC5-44800) and will operate at that speed if the motherboard supports it.
Will the 288-pin UDIMM fit the SuperMicro C9Z890-MW without a heat spreader?
Yes, the 288-pin DDR5 UDIMM form factor matches the board's DIMM slots and the module has no heat spreader to interfere.
How do I install the 48GB 2Rx8 module and what step is often missed?
Power off, open the case, align the notch on the 288-pin UDIMM with the slot key, press firmly until both side clips click, then verify the full 48GB appears in BIOS.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00282848BTC
På lager
