NEMIX RAM
NEMIX RAM 512GB (8x64GB) DDR5 4800 CL40 ECC RDIMM Dell PowerEdge XE9680 memory upgrade
Eight registered DDR5 modules deliver 512 GB of ECC memory at 4800 MT/s for the Dell PowerEdge XE9680
- Capacity512GB (8 x 64GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 512 GB total capacity from eight 64 GB modules
- DDR5 4800 speed with CL40 latency for server workloads
- ECC registered RDIMM design protects data integrity
- 10 V operation reduces power draw in dense configs
- Validated for Dell PowerEdge XE9680 compatibility
Dell PowerEdge XE9680 memory kit
This 512 GB kit contains eight 64 GB DDR5 4800 registered DIMMs with ECC and CL40 latency. It is built for the Dell PowerEdge XE9680 server and runs at 1.1 V using 2Rx4 Samsung, Micron or Hynix chips.
Who this suits and who should look elsewhere
IT teams expanding memory in a Dell PowerEdge XE9680 will match the factory specification exactly. Buyers who need unbuffered modules, a different capacity per DIMM or a speed other than 4800 MT/s should choose another kit.
Installation notes
The 288-pin RDIMMs seat in the server's standard DDR5 slots without tools. Always follow the Dell service manual for population order and firmware updates; incorrect slot filling is the most common cause of a failed POST.
Høydepunkter
- 512 GB total capacity from eight 64 GB modules
- DDR5 4800 speed with CL40 latency for server workloads
- ECC registered RDIMM design protects data integrity
- 10 V operation reduces power draw in dense configs
- Validated for Dell PowerEdge XE9680 compatibility
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K8 |
| Capacity | 512GB (8 x 64GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 512GB (8X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Spørsmål om denne varen
Does the Dell PowerEdge XE9680 need all 8 DIMM slots free to install this 8×64 GB kit?
The kit supplies eight 64 GB modules, so eight empty 288-pin DDR5 RDIMM slots are required for a full 512 GB population.
Can I keep my existing DDR5 4800 CL40 registered ECC modules and add this kit to the same server?
Mixing is possible only if the installed modules match the 2Rx4 rank layout, 1.10 V voltage and CL40 timing; otherwise the system will default to the slowest common settings.
How do I verify the full 512 GB is recognised and ECC is active after installation?
Check the BIOS memory map for 512 GB total and confirm ECC status shows enabled; the OS should report 512 GB with no correctable error count climbing under load.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.



