Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

NEMIX RAM

NEMIX RAM DDR4 3200 1TB 8x128GB ECC RDIMM Supermicro X12SPT-G

SKU CH-3ZCY-NCBRD

Eight 128 GB DDR4 3200 RDIMM modules with ECC and registered buffering for Supermicro X12SPT-G and X12SPT-GC motherboards

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • 1TB capacity from eight 128GB modules for maximum server density
  • DDR4 3200 speed with CL22 latency runs at rated performance
  • ECC registered design corrects single-bit errors preventing data corruption
  • 2Rx4 1.2V configuration matches motherboard memory controller requirements
  • 288-pin RDIMM form factor fits Supermicro X12SPT-G and X12SPT-GC motherboards

Exact-Match 1 TB DDR4 Kit

This NEMIX RAM kit delivers 1 TB of DDR4 3200 ECC Registered memory in eight 128 GB RDIMM modules. It is built for the Supermicro X12SPT-G and X12SPT-GC motherboards, matching the 288-pin RDIMM form factor, 1.2 V voltage, CL22 timing and 2Rx4 rank layout those boards require.

Suited For Fully Populated Servers

It suits administrators who need to populate every slot at rated speed with registered ECC modules that correct single-bit errors on the fly. Builders using consumer UDIMM or SODIMM slots, or boards that only support unbuffered memory, should look elsewhere.

Deciding Spec 288-Pin RDIMM

The 288-pin Registered DIMM form factor is the single specification that determines fit. Only motherboards wired for DDR4 RDIMM can accept these modules; any other slot type will physically or electrically reject the kit.

Høydepunkter

  • 1TB capacity from eight 128GB modules for maximum server density
  • DDR4 3200 speed with CL22 latency runs at rated performance
  • ECC registered design corrects single-bit errors preventing data corruption
  • 2Rx4 1.2V configuration matches motherboard memory controller requirements
  • 288-pin RDIMM form factor fits Supermicro X12SPT-G and X12SPT-GC motherboards

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR4 3200MHz PC4-25600 2Rx4 1.2V 288-PIN ECC RDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

What motherboard must I already have for this 8x128GB DDR4 3200 ECC RDIMM kit to work?

The kit is validated for Supermicro X12SPT-G and X12SPT-GC motherboards running DDR4 3200 PC4-25600 registered memory.

How will these 2Rx4 registered DIMMs behave if I keep older DDR4 RDIMMs in the same server?

Mixing ranks or speeds forces the memory controller to run all slots at the lowest common speed and may prevent full 1 TB recognition.

How can I confirm the kit is running at 3200 MT/s with ECC active after installation?

Enter the BIOS memory information screen and verify the reported speed is 3200 MT/s, CAS latency is CL22 and ECC status shows enabled.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.