Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Six green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 288GB (6×48GB) 4800 CL40 ECC RDIMM Supermicro H13SSL-NT memory upgrade

SKU CH-YG2R-HNTMD

Six 48 GB DDR5-4800 ECC registered DIMMs at CL40 and 1.1 V, validated for full-capacity operation on the Supermicro H13SSL-NT motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Vis 24 flere konfigurasjoner
  • 288 GB total capacity from six 48 GB modules for dense server workloads
  • DDR5-4800 speed with CL40 latency and 1.1 V operation for efficient throughput
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 288-pin RDIMM form factor matches Supermicro H13SSL-NT motherboard requirements exactly
  • Built with major OEM chips from Samsung, Micron or Hynix for enterprise-grade reliability

Server memory kit

This 288GB kit contains six 48GB DDR5 RDIMM modules rated at 4800MHz with CL40 timings and 1.1V operation. It is built for the Supermicro H13SSL-NT motherboard and targets administrators who need maximum registered ECC capacity in a validated configuration.

Registered ECC RDIMM form factor

Each module uses a 288-pin registered design with 2Rx8 organisation so the memory controller is buffered when all slots are populated. ECC corrects single-bit errors on the fly while the registered architecture keeps every channel stable at full capacity without a heat spreader.

Replaces partial or mixed-capacity sets

The kit eliminates population-order guesswork by delivering the exact rank, voltage and timing the board expects for full-speed recognition. It is not suited for systems that require UDIMM or SODIMM form factors or for workloads that demand speeds beyond the DDR5 4800 specification.

Høydepunkter

  • 288 GB total capacity from six 48 GB modules for dense server workloads
  • DDR5-4800 speed with CL40 latency and 1.1 V operation for efficient throughput
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 288-pin RDIMM form factor matches Supermicro H13SSL-NT motherboard requirements exactly
  • Built with major OEM chips from Samsung, Micron or Hynix for enterprise-grade reliability

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Does the DDR5-4800 PC5-38400 interface limit the kit to 4800 MT/s on the Supermicro H13SSL-NT?

Yes, the modules are rated DDR5-4800 (PC5-38400) and will run at that speed when the board's memory controller is set to its default JEDEC profile.

What physical slot and form factor do the six 48 GB modules require on the H13SSL-NT?

They are 288-pin DDR5 RDIMMs, so each one must go into a standard DDR5 DIMM slot on the motherboard; UDIMM or SODIMM slots will not accept them.

What is the correct population order for all six RDIMMs, and which step is most often missed?

Follow the H13SSL-NT manual's exact DIMM sequence — typically filling one slot per channel first — and the step most often missed is installing modules in the prescribed order rather than simply occupying every slot.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.