Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 64GB 2x32GB ECC RDIMM Supermicro X14SDW-42C-SP9F memory upgrade

SKU CH-ZRKW-GQMXR

A 64 GB DDR5 5600 ECC RDIMM kit validated for the Supermicro X14SDW-42C-SP9F

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • 64 GB total capacity from a matched 2 × 32 GB kit
  • DDR5-5600 (PC5-44800) speed with CL46 latency runs at rated frequency
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operating voltage and 288-pin RDIMM form factor match board requirements
  • Verified fitment for Supermicro X14SDW-42C-SP9F motherboard memory population rules

Exact-fit 64 GB DDR5-5600 kit

This NEMIX RAM kit delivers 64 GB as two 32 GB DDR5-5600 Registered ECC RDIMMs. The modules run at 1.1 V with CL46 latency and a 2Rx8 rank structure that matches the memory controller requirements of the Supermicro X14SDW-42C-SP9F motherboard.

For servers needing registered ECC memory

This kit suits administrators upgrading or populating the named Supermicro board with validated Registered DIMMs. Builders who need unbuffered UDIMMs, SODIMMs, non-ECC modules, or a different speed grade should select a different product.

2Rx8 registered ECC at 1.1 V

The 2Rx8 registered ECC organisation at 1.1 V is the single specification that determines whether the motherboard will recognise the full 64 GB at the rated DDR5-5600 speed. Verify the board's qualified-vendor list and population rules before installation.

Høydepunkter

  • 64 GB total capacity from a matched 2 × 32 GB kit
  • DDR5-5600 (PC5-44800) speed with CL46 latency runs at rated frequency
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operating voltage and 288-pin RDIMM form factor match board requirements
  • Verified fitment for Supermicro X14SDW-42C-SP9F motherboard memory population rules

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Does this 64GB DDR5-5600 kit require the Supermicro X14SDW-42C-SP9F motherboard to run at its rated speed?

The kit is spec-matched to the Supermicro X14SDW-42C-SP9F and runs at DDR5-5600 (PC5-44800) with CL46 at 1.10V when installed on that board.

Will the 2Rx8 registered ECC RDIMMs work alongside different-rank modules already in my server?

Registered architecture lets every slot run fully populated at full capacity, but the manual should be checked for supported population order before mixing ranks.

How do I confirm the kit is recognised at 64GB and DDR5-5600 after installation?

Check the BIOS memory information or OS reporting for 64GB total capacity, DDR5-5600 speed, CL46 timing, and ECC registered status.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.