NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 576GB (12×48GB) CL46 1.1V 2Rx8 Supermicro H13DSG-O-CPU
A 576GB DDR5 server kit of twelve 48GB registered ECC modules running at 5600MHz CL46 1.1V for Supermicro H13DSG-O-CPU motherboards
- Capacity576GB (12 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 576GB total capacity from twelve 48GB modules maximises server memory density
- DDR5 5600 speed with CL46 latency delivers rated throughput for compute workloads
- Registered ECC architecture corrects single-bit errors and supports full population stability
- 1V operation at 2Rx8 rank matches the motherboard memory controller specification
- 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility
576GB DDR5-5600 ECC RDIMM Kit
This 576GB kit contains twelve 48GB DDR5-5600 registered ECC modules built to the PC5-44800 standard. It is designed for servers that require fully populated memory channels with error-correcting, buffered DIMMs running at 1.1V and CL46 latency.
Verified Supermicro H13DSG-O-CPU Compatibility
The modules match the exact rank, voltage, and timing parameters expected by the Supermicro H13DSG-O-CPU motherboard. Registered architecture allows all twelve slots to operate at full capacity without signal degradation, while ECC corrects single-bit errors to prevent silent data corruption.
For Maximum-Capacity Server Deployments
This kit suits administrators upgrading a Supermicro H13DSG-O-CPU platform to its maximum supported memory configuration using 2Rx8 registered DIMMs. Builders needing unbuffered UDIMMs, SODIMM form factors, lower total capacities, or compatibility with different motherboard models should verify their platform requirements before purchase.
Høydepunkter
- 576GB total capacity from twelve 48GB modules maximises server memory density
- DDR5 5600 speed with CL46 latency delivers rated throughput for compute workloads
- Registered ECC architecture corrects single-bit errors and supports full population stability
- 1V operation at 2Rx8 rank matches the motherboard memory controller specification
- 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K12 |
| Capacity | 576GB (12 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Spørsmål om denne varen
Does the 288-pin RDIMM form factor fit the Supermicro H13DSG-O-CPU motherboard's memory slots?
Yes, the kit uses 288-pin Registered DDR5 RDIMMs, which is the exact form factor the H13DSG-O-CPU requires; UDIMMs or SODIMMs will not work in this board.
What is the correct population order when installing all twelve 48 GB modules?
Fill the twelve slots following the motherboard manual's approved DIMM population sequence for full capacity; the board's memory-controller rules dictate the exact slot order.
Will the registered ECC modules need any firmware updates or scheduled replacement?
No firmware updates are required for the memory itself; ECC corrects single-bit errors on the fly, and the modules are covered by a lifetime replacement warranty if a hardware fault ever occurs.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



