Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Twelve green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 1.1TB (12x96GB) for Supermicro H13SSH-E

SKU CH-HVYF-BSQDY

1.1 TB DDR5-5600 ECC registered RDIMM kit of twelve 96 GB modules for Supermicro H13SSH-E servers

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 1TB total capacity from twelve 96GB modules enables large-scale virtualization workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSH-E
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10V operating voltage matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the board's required DIMM sockets without adapters

1.1TB DDR5 ECC RDIMM kit

This NEMIX RAM kit delivers 1.1TB of DDR5 5600 memory in a 12-module configuration of 96GB each. The modules are 288-pin Registered DIMMs with ECC and a 2Rx4 organisation, operating at 1.10V with CL46 latency. They are built as an exact-match upgrade for the Supermicro H13SSH-E motherboard.

Suited for full-capacity server builds

This kit suits administrators populating every slot on a compatible Supermicro H13SSH-E board with registered ECC memory at rated speed. It is not for systems that require unbuffered UDIMMs, SODIMMs, or a different DDR generation. Buyers needing a smaller capacity or a different rank configuration should look elsewhere.

Fits a registered-DIMM server platform

The 288-pin RDIMM form factor matches the board's registered memory requirement, and the 2Rx4 rank structure works with the memory controller when fully populated. ECC corrects single-bit errors on the fly while the registered architecture offloads the controller. Verify the motherboard manual for approved population order before installation.

Høydepunkter

  • 1TB total capacity from twelve 96GB modules enables large-scale virtualization workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSH-E
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10V operating voltage matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the board's required DIMM sockets without adapters

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Spørsmål om denne varen

Does my Supermicro H13SSH-E motherboard need all twelve DDR5 5600 RDIMM slots filled for this 1.1TB kit to operate?

The kit provides twelve 96GB modules. The H13SSH-E has twelve DDR5 RDIMM slots, so the kit fully populates the board. Consult the motherboard manual for the approved population order before installation.

Will my existing DDR5 RDIMMs with different speeds or ranks work alongside these CL46 2Rx4 modules?

Mixing modules with different speeds, ranks, or timings can prevent the server from booting or force all DIMMs to run at the lowest common settings. For stable operation, use identical DDR5 5600 CL46 2Rx4 registered ECC modules in every populated slot.

How do I confirm the server recognises the full 1.1TB capacity at DDR5 5600 after installation?

Enter the BIOS or UEFI and check the memory information screen. It should show 1.1TB total, DDR5 5600 (PC5-44800) speed, CL46 latency, 1.1V voltage, and ECC registered status for all twelve DIMMs.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.