BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00281088BTC
På lager
NEMIX RAM
NEMIX RAM DDR5 6400 288GB (6×48GB) CL52 1.1V 2Rx8 ECC RDIMM Supermicro H13SRH memory upgrade
288 GB registered ECC DDR5 kit of six 48 GB modules at 6400 MT/s with CL52 timing and 1.1 V operation for Supermicro H13SRH motherboards
- Capacity288GB (6 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 288 GB total capacity from six 48 GB modules
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects errors and buffers signals
- Exact fit for Supermicro H13SRH motherboard
- Major-brand DRAM chips from Samsung, Micron or Hynix
Exact-match server kit
This NEMIX RAM kit delivers 288 GB of DDR5 registered ECC memory in six 48 GB modules. It is built for the Supermicro H13SRH motherboard and runs at 6400 MT/s with CL52 latency at 1.1 V. The 2Rx8 registered design matches the board's memory controller requirements for full-capacity recognition.
Registered ECC architecture
Registered buffering offloads the memory controller so all slots can be populated at rated speed without signal degradation. On-die ECC corrects single-bit errors in flight, protecting data integrity in production workloads. The 288-pin RDIMM form factor fits only boards wired for registered DDR5; it will not work in UDIMM or SODIMM slots.
Suited for capacity-bound servers
This kit suits administrators who need the maximum validated capacity on an H13SRH platform and require ECC protection for continuous operation. It is not for builds that need unbuffered modules, lower voltages, or consumer desktop boards that lack registered DDR5 support.
Høydepunkter
- 288 GB total capacity from six 48 GB modules
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects errors and buffers signals
- Exact fit for Supermicro H13SRH motherboard
- Major-brand DRAM chips from Samsung, Micron or Hynix
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K6 |
| Capacity | 288GB (6 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Spørsmål om denne varen
Will the CL52 latency at 6400 MHz hold steady when all six slots on the Supermicro H13SRH are populated?
The kit is specced at CL52 for DDR5 6400 operation, and the registered design is built to maintain those timings across a fully populated six-DIMM configuration on the H13SRH.
How much heat and power should I expect from a 1.10 V, 288 GB RDIMM kit running continuously in a server chassis?
Each 48 GB module runs at 1.10 V without a heat spreader; registered buffering reduces electrical load on the memory controller, so total power draw and thermals stay within standard DDR5 RDIMM limits for dense 6-channel setups.
Does the Supermicro H13SRH need a specific BIOS revision or CPU stepping to recognise 48 GB 2Rx8 RDIMMs at full 6400 speed?
The kit is validated for the H13SRH motherboard; the board's own memory-population rules and supported DIMM configurations determine which BIOS or CPU revisions are required for full-speed recognition.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00283703BTC
På lager
