NEMIX RAM
NEMIX RAM DDR5 6400 2TB 16x128GB ECC RDIMM Supermicro H14DST-F
A 2 TB registered ECC DDR5 kit with sixteen 128 GB modules running at 6400 MT/s, CL52 and 1.1 V, validated for the Supermicro H14DST-F motherboard
- Capacity2TB (16 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Massive 2 TB capacity from sixteen 128 GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design prevents silent data corruption
- Exact match for Supermicro H14DST-F memory population rules
- Lifetime replacement warranty with free US-based technical support
Exact-match DDR5 upgrade for Supermicro H14DST-F
This 2TB kit supplies sixteen 128GB DDR5 6400 RDIMMs built to the PC5-51200 standard. Registered ECC architecture with 2Rx4 organisation and CL52 timing matches the board's memory controller so every slot runs at rated speed. The 1.10V modules arrive new and ready for immediate deployment in supported configurations.
Thermals noise and power in normal use
Operating at 1.10V, the modules draw minimal power while the registered buffer reduces electrical load on the memory controller. Without heat spreaders, airflow across the bare PCB handles typical server chassis cooling without added fan noise. ECC correction runs transparently during standard workloads, preventing silent data corruption without performance penalty.
Behaviour under sustained load
Fully populated 16-slot configurations maintain stability because registered signalling offloads the controller during continuous operation. ECC single-bit correction keeps data integrity intact across long compute runs, avoiding unplanned reboots. The kit is validated for the Supermicro H14DST-F population rules; other boards or mixed-capacity setups may not support the full 2TB at DDR5 6400.
Høydepunkter
- Massive 2 TB capacity from sixteen 128 GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design prevents silent data corruption
- Exact match for Supermicro H14DST-F memory population rules
- Lifetime replacement warranty with free US-based technical support
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K16 |
| Capacity | 2TB (16 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 2TB 16X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Spørsmål om denne varen
How do I install the 16 DDR5 RDIMM modules into the Supermicro H14DST-F, and which population step is most often missed?
Fill all 16 slots following the motherboard manual's exact population order; the step most often missed is skipping the prescribed sequence, which prevents the system from recognising the full 2TB capacity at DDR5-6400.
What maintenance or replacement will this 2TB DDR5 ECC RDIMM kit need during its service life?
No scheduled maintenance is required; the modules are covered by a lifetime replacement warranty, so any failed DIMM is replaced rather than serviced.
What limit appears first when the 16x128GB DDR5-6400 kit runs sustained workloads on the H14DST-F?
The memory controller's maximum supported capacity and speed ceiling is reached first; with all 16 slots populated at 2Rx4, the system operates at the rated DDR5-6400 CL52 1.1V limit.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.



