BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278589BTC
På lager
NEMIX RAM
NEMIX RAM MD25600-818K1 8GB DDR4 3200 CL22 1.2V 288-Pin UDIMM
8 GB DDR4 3200 CL22 1.2 V unbuffered 288-pin UDIMM for desktop upgrades
- Capacity8GB
- Type288-Pin DDR4 UDIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 8GB capacity expands desktop memory headroom
- DDR4 3200 speed matches PC4-25600 bandwidth
- CL22 latency keeps timing predictable
- 2V operation reduces power draw
- 288-pin UDIMM fits standard desktop slots
8 GB DDR4 3200 UDIMM
This 8 GB DDR4 module runs at 3200 MT/s with CL22 latency and 1.20 V operation. It uses a standard 288-pin unbuffered non-ECC design for desktop motherboards. The single-rank layout keeps electrical loading light for broad platform compatibility.
Fills empty slots
Swapping out a slower DIMM or adding capacity to a free slot is the intended use. Systems that require registered or ECC memory will not accept this stick. Builders needing higher density per slot should consider larger modules.
CL22 at 3200 MT/s
The CAS latency of 22 cycles at the rated 3200 MT/s speed is the key timing figure. Motherboard firmware will apply this latency automatically when the DIMM is detected. Verify that your board supports DDR4 3200 before purchase.
Høydepunkter
- 8GB capacity expands desktop memory headroom
- DDR4 3200 speed matches PC4-25600 bandwidth
- CL22 latency keeps timing predictable
- 2V operation reduces power draw
- 288-pin UDIMM fits standard desktop slots
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD25600-818K1 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Spørsmål om denne varen
Will the 288-pin DDR4 UDIMM fit a standard desktop DIMM slot?
The module uses the 288-pin DDR4 UDIMM form factor which matches standard desktop DIMM slots. No heat spreader is present so clearance is minimal.
What is the correct way to seat the module and what step is often missed?
Align the notch with the slot key, press down firmly until both retention clips click into the side notches. The step often missed is verifying both clips are fully engaged.
Does the CL22 1.20V module need any firmware updates or component replacement over time?
No firmware updates are required for the memory itself. The DRAM chips are soldered and not user replaceable; if errors appear the whole module is replaced.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00281181BTC
På lager
