OEM Industries
OEM Industries MGT4012ZB-R20 40mm fan 12V 12000 RPM 13.8 CFM 30.5 dBA ball bearing 3-pin
40 mm 12 V ball-bearing fan delivers 13.8 CFM at 12,000 RPM and 30.5 dBA
- ColorBlack
- TypeFan only
- Fan Size40mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- High airflow in tight spaces with 13.8 CFM at 12000 RPM
- Quiet operation at 30.5 dBA for low-noise builds
- Durable dual ball bearing extends service life
- Standard 3-pin connector fits most motherboard headers
- Compact 40 × 40 × 20 mm frame suits small-form-factor chassis
Compact 40 mm Cooling Fan
The OEM Industries MGT4012ZB-R20 is a 40 mm DC fan built for confined spaces that demand focused airflow. It runs on 12 V and draws 0.22 A while spinning at 12000 RPM to deliver 13.8 CFM at 30.5 dBA. The two-ball bearing and 3-pin connector suit continuous operation in industrial or embedded chassis.
Who This Suits and Who Should Look Elsewhere
System integrators needing a slim 40 x 40 x 20 mm frame for 1U servers, GPU coolers or networking gear will find the dimensions and airflow match. Builders who require PWM speed control, lower noise at idle or a larger frame for higher static pressure should consider other options.
Deciding Specification: 12000 RPM at 30.5 dBA
The 12000 RPM rating sets both the cooling capacity and the acoustic profile in a single figure. If the target device can tolerate 30.5 dBA at full speed, the airflow meets most compact heatsink requirements; if silence is the priority, the fixed-speed design leaves no headroom for quieter running.
Høydepunkter
- High airflow in tight spaces with 13.8 CFM at 12000 RPM
- Quiet operation at 30.5 dBA for low-noise builds
- Durable dual ball bearing extends service life
- Standard 3-pin connector fits most motherboard headers
- Compact 40 × 40 × 20 mm frame suits small-form-factor chassis
Spesifikasjoner
| Model | MGT4012ZB-R20 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 40mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
Spørsmål om denne varen
How loud and hot does the 40 mm ball-bearing fan get when it runs continuously at 12000 RPM?
The fan produces 30.5 dBA at 12000 RPM and moves 13.8 CFM; ball bearings handle sustained heat better than sleeve types.
What must my motherboard or controller provide to run this 12 V 0.22 A 3-pin fan?
A standard 3-pin 12 V header supplying at least 0.22 A; no PWM pin is present, so speed is voltage-controlled.
Will the 40×40×20 mm frame and 3-pin connector fit the older CPU cooler I want to keep?
The fan measures 40 mm square by 20 mm thick with a 3-pin plug, matching many legacy 40 mm cooler mounts.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



