Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Four black DDR3L UDIMM sticks without heat spreaders

OWC

OWC 16GB (4x4GB) DDR3L 1600 CL11 1.35V ECC Unbuffered UDIMM Kit

SKU CH-E8SE-2HAEM

A 16 GB DDR3L ECC unbuffered kit of four 4 GB modules running at 1600 MHz with CL11 latency at 1.35 V for desktops, workstations or servers

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (4 x 4GB)

  • 16 GB total capacity for heavier workloads
  • DDR3L 1600 speed with CL11 latency
  • 35 V operation lowers power draw
  • ECC unbuffered design protects data integrity
  • Four 4 GB modules enable dual-channel bandwidth

16GB DDR3L ECC Kit for Workstations

This kit provides 16GB of DDR3L memory across four 4GB unbuffered UDIMM modules. It is built for desktops, workstations and NAS systems that require error-correcting code support. The modules run at 1600MHz with a CAS latency of 11. Operating voltage is 1.35V.

240-Pin JEDEC Compliant Unbuffered DIMMs

Each module uses the standard 240-pin DDR3 form factor without a heat spreader. The design follows JEDEC and RoHS specifications for a warranty-safe upgrade. Unbuffered ECC organisation allows direct connection to the memory controller in compatible platforms. Black PCBs give a neutral appearance inside the chassis.

DDR3L 1600 CL11 Voltage and Platform Limits

The DDR3L interface caps transfer rates at 1600MT/s and requires a memory controller that supports 1.35V operation. ECC functionality only activates on platforms with an ECC-capable chipset and BIOS. Unbuffered topology limits the maximum usable rank count per channel compared to registered alternatives.

Høydepunkter

  • 16 GB total capacity for heavier workloads
  • DDR3L 1600 speed with CL11 latency
  • 35 V operation lowers power draw
  • ECC unbuffered design protects data integrity
  • Four 4 GB modules enable dual-channel bandwidth

Spesifikasjoner

BrandOWC
Part Number1E6T32R8016S
Capacity16GB (4 x 4GB)
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will this kit work in a standard desktop motherboard that takes 240-pin DDR3 DIMMs?

The modules are 240-pin DDR3L UDIMMs, so they fit any desktop board with DDR3 slots that accepts 1.35 V unbuffered ECC memory.

Do I need a CPU or chipset that specifically supports ECC for this memory to function?

Yes — the system must support unbuffered ECC; otherwise the modules will either run without error correction or may not post at all.

Can I mix these 4 GB sticks with existing 8 GB DDR3L modules to reach 32 GB total?

Mixing capacities is possible if the motherboard supports the total density and all modules share the same 1600 MHz CL11 1.35 V specification.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.