Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green rectangular DDR3 memory module with gold edge connector and black chips on both sides

OWC

OWC 1R3D32R408GB 8GB DDR3 1333 ECC Registered RDIMM Supermicro 1026 2026 6016 Series

SKU CH-VZBT-3C9ZP

8GB DDR3 1333 ECC registered RDIMM for Supermicro 1026, 2026 and 6016 series servers

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1333 speed matches PC3-10600 spec for stable throughput
  • ECC registered design detects and corrects single-bit errors
  • 240-pin 2Rx4 module fits Supermicro 1026 2026 6016 series
  • 5V operation meets JEDEC standard for reliable power draw

8 GB DDR3 ECC RDIMM for Supermicro Servers

This 8 GB DDR3 1333 ECC registered DIMM is built for Supermicro SuperServer 1026GT, 1026T, 1026TT, 2026TT and 6016GT systems. It targets administrators who need a single-module capacity upgrade for these qualified platforms.

DDR3 1333 registered memory limits

The module operates at DDR3 1333 (PC3 10600) with CL9 latency and 1.5 V. Registered buffering and ECC are mandatory for the listed servers; unbuffered or non-ECC DIMMs will not function in these systems. Mixing registered with unbuffered memory is not supported.

Single 8 GB 2Rx4 module constraint

Each stick provides 8 GB in a 2Rx4 organisation using 240-pin DDR3 form factor. Buyers who need larger per-slot capacities or higher speeds than DDR3 1333 must select different modules qualified for their specific Supermicro chassis.

Høydepunkter

  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1333 speed matches PC3-10600 spec for stable throughput
  • ECC registered design detects and corrects single-bit errors
  • 240-pin 2Rx4 module fits Supermicro 1026 2026 6016 series
  • 5V operation meets JEDEC standard for reliable power draw

Spesifikasjoner

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 1026GT Series
Supermicro SuperServer 1026T Series
Supermicro SuperServer 1026TT Series
Supermicro SuperServer 2026TT Series
Supermicro SuperServer 6016GT Series

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Should I buy a single 8GB module or multiple sticks for my Supermicro server?

This OWC part is a single 8GB DDR3 1333 registered DIMM; the manufacturer recommends matching capacity, speed and vendor across all slots for best stability.

What does the 1333 MT/s rating deliver in a live Supermicro 1026 or 6016 system?

The module runs at DDR3 1333 (PC3 10600) with CL9 latency at 1.5 V, providing the rated bandwidth the server’s memory controller negotiates at boot.

Will this 240-pin DDR3 RDIMM work in a standard desktop motherboard?

No — it is ECC registered DDR3 memory designed for Supermicro SuperServer 1026, 2026 and 6016 series; unbuffered desktop boards cannot use registered modules.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.