Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Four green DDR3L 240-pin ECC registered DIMMs in anti-static tray

OWC

OWC 32GB (4x8GB) DDR3L 1333 ECC Registered RDIMM 240-pin 1.35V memory upgrade

SKU CH-0BYD-JFFPW

32GB DDR3L 1333 ECC registered RDIMM kit for Cisco UCS B230 M1 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design prevents data errors in servers
  • 32GB kit (4×8GB) expands Cisco UCS B230 M1 capacity
  • DDR3L 1333 CL9 matches system memory speed
  • Low 1.35V voltage reduces power draw and heat
  • Replaces Cisco part numbers N01M308GB2 and UCSMR series

OWC 32GB DDR3L 1333 ECC Registered Kit

This OWC kit provides 32GB of DDR3L memory as four 8GB registered DIMMs. Each module runs at 1333MHz with CL9 latency and operates at 1.35V. The 240-pin RDIMMs include ECC and registered buffering for data integrity. They are validated for the Cisco UCS B230 M1 server platform.

Suited for Cisco UCS B230 M1 upgrades

This memory suits administrators upgrading or repairing a Cisco UCS B230 M1 server. It will not work in standard desktop PCs or consumer laptops. Builders needing unbuffered DIMMs or load-reduced modules should look elsewhere. Mixing with non-registered memory is not supported by the platform.

Registered ECC DDR3L 1.35V specification

The registered ECC design with 1.35V DDR3L signalling is the single specification that decides compatibility. The Cisco UCS B230 M1 requires this exact combination of buffering, error correction and low voltage. Modules lacking registration or ECC will not function in this system.

Høydepunkter

  • ECC registered design prevents data errors in servers
  • 32GB kit (4×8GB) expands Cisco UCS B230 M1 capacity
  • DDR3L 1333 CL9 matches system memory speed
  • Low 1.35V voltage reduces power draw and heat
  • Replaces Cisco part numbers N01M308GB2 and UCSMR series

Spesifikasjoner

BrandOWC
Part Number1R3T32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B230 M1

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Is the 32GB kit the only capacity offered for this DDR3L 1333 ECC Registered RDIMM?

The listing shows a single 32GB kit built from four 8GB modules. No other capacities are mentioned for this part number.

What does the PC3L-10600 1333MHz CL9 rating deliver in a Cisco UCS B230 M1 server?

It runs at 1333 MT/s with CL9 latency at 1.35V, providing ECC error correction and registered buffering for stable server workloads.

Does the 240-pin DDR3L interface limit the maximum speed or voltage compared with standard DDR3?

The modules operate at 1.35V and 1333 MT/s, which is the rated speed for PC3L-10600; the 240-pin form factor fits the B230 M1 memory slots.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.