Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Four green DDR3 RDIMM modules in anti-static bags

OWC

OWC 64GB (4x16GB) DDR3 1333 ECC Registered RDIMM memory upgrade for Supermicro X8DA6 X8DAE X8DAH+ X8DAL X8DT3

SKU CH-ZD3E-TXA83

Four-module 64 GB DDR3 1333 ECC registered RDIMM kit for Supermicro X8DA6, X8DAE, X8DAH+, X8DAL and X8DT3 servers

  • Capacity64GB (4 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • 64 GB total capacity from four 16 GB modules
  • DDR3 1333 MHz CL9 registered ECC for server stability
  • 5 V 240-pin RDIMM fits listed Supermicro boards
  • 2Rx4 organisation maximises density per slot
  • JEDEC and RoHS compliant for reliable operation

Server ECC Memory Kit

This OWC kit supplies 64GB of DDR3 1333 registered ECC memory across four 16GB modules. It is built for Supermicro X8DA6 X8DAE X8DAH+ X8DAL and X8DT3 motherboards in workstation or server roles. The 240-pin RDIMM format and 1.5V operation match the platform specifications exactly.

Not for desktop or unbuffered builds

Buyers upgrading a standard desktop PC cannot use these modules because they require registered ECC memory controllers. Systems that only accept unbuffered non-ECC DDR3 will not recognise the kit. Mixing these registered DIMMs with unbuffered memory is also unsupported.

Registered ECC decides compatibility

The single specification that determines fit is the registered ECC RDIMM design combined with DDR3 1333 CL9 timing. Only motherboards that explicitly support registered ECC DDR3 at this speed and voltage will operate correctly with the kit.

Høydepunkter

  • 64 GB total capacity from four 16 GB modules
  • DDR3 1333 MHz CL9 registered ECC for server stability
  • 5 V 240-pin RDIMM fits listed Supermicro boards
  • 2Rx4 organisation maximises density per slot
  • JEDEC and RoHS compliant for reliable operation

Spesifikasjoner

BrandOWC
Part Number1R3D32R4064S
Capacity64GB (4 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DA6 Series
Supermicro Motherboard X8DAE Series
Supermicro Motherboard X8DAH+ Series
Supermicro Motherboard X8DAL Series
Supermicro Motherboard X8DT3 Series

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will the 240-pin DDR3 RDIMMs fit the DIMM slots on a Supermicro X8DAH+ motherboard?

Yes, the kit uses the standard 240-pin DDR3 RDIMM form factor that matches the registered DIMM slots on the listed Supermicro X8 series boards.

What is the correct order to populate the four 16 GB modules on a dual-socket X8DAE board?

Install one module per channel per CPU, starting with the first slot of each channel; the silkscreen labels DIMM A1, B1, C1, D1 for the first processor and E1, F1, G1, H1 for the second.

When should the registered ECC modules be replaced in a server running 24/7?

Replace them if the system logs corrected ECC errors that exceed the platform threshold or if a memory diagnostic reports uncorrectable failures on any of the four sticks.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.