Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Silver rectangular ATX power supply unit, single fan, compact depth, 1.5 kg

Replace Power

Replace Power RPSU-ats100 420W ATX Power Supply

SKU CH-VK3F-YYSG3 MPN RPSU-ats100

ATX power supply replaces legacy HP Bestec units with 420 W output and reduced depth for broad compatibility

  • TypeATX
  • Fans1
  • Weight1.5
  • 420 W output replaces legacy Bestec units without rewiring
  • 20+4 pin ATX connector fits both 20-pin and 24-pin motherboards
  • Reduced 5.9" depth slides into tight chassis where standard PSUs will not
  • 110-260 V AC switchable input works worldwide without an external adapter
  • Over-current, over-voltage, over-power and short-circuit protection guards connected hardware

Replacement PSU for legacy HP Bestec units

This 420 watt ATX supply replaces several older Bestec models including ATS-100, ATS-150 and ATX-1956 series units. A built-in 20+4 pin adapter supports both 24 and 20 pin motherboards. Reduced depth improves fit in compact chassis. Single fan cooling handles the rated load.

Sustained-load behaviour with protection circuits

Over current, over power, over voltage and short circuit protection activate during prolonged heavy demand. Hold-up time is 17 ms minimum at nominal input. Rise time stays under 70 ms. The 110-260 V AC switchable input operates across 47 to 63 Hz mains frequency. Low ripple and noise are maintained under continuous operation.

Upgrade from 250 W and 300 W legacy units

The 420 W rating provides headroom over original 250 W and 300 W supplies such as ATX-250-12Z, ATX-300-12Z and DPS-300AB. The jump is worthwhile when added drives or expansion cards exceed the original unit's capacity. Connectors include one P4 4 pin, three SATA 15 pin, three LP4 4 pin and one floppy 4 pin.

Høydepunkter

  • 420 W output replaces legacy Bestec units without rewiring
  • 20+4 pin ATX connector fits both 20-pin and 24-pin motherboards
  • Reduced 5.9" depth slides into tight chassis where standard PSUs will not
  • 110-260 V AC switchable input works worldwide without an external adapter
  • Over-current, over-voltage, over-power and short-circuit protection guards connected hardware

Spesifikasjoner

BrandReplace Power
ModelRPSU-ats100
TypeATX
Fans1
Weight1.5

Spørsmål om denne varen

How much noise and heat does the 420 W unit produce when it runs all day?

A single fan provides cooling; the supply is Hi-Pot tested for low ripple and noise and includes over-current, over-power, over-voltage and short-circuit protection.

What must I already own for this ATX supply to work in my system?

You need a motherboard with a 20-pin or 24-pin ATX socket, a CPU 4-pin connector, up to three SATA drives, up to three LP4 peripherals and optionally one floppy drive.

Will the RPSU-ats100 fit and power an older HP Bestec ATS-100 or ATX-1956D chassis?

Yes — reduced depth of 5.86" x 3.3" matches legacy HP Bestec ATS-100, ATS-150, ATX-1953D, ATX-1956D, ATX-1956-B1, ATX-1956F and other listed models.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.