SAMSUNG
SAMSUNG 9100 PRO 1TB PCIe 5.0 x4 NVMe M.2 2280 internal SSD
A 1 TB M.2 2280 NVMe drive using PCIe 5.0 x4 for fast sequential performance and a 1500000-hour MTBF
- MTBF1,500,000 hours
- 1 TB capacity for large project files
- PCIe 5.0 x4 interface for fast sequential throughput
- NVMe protocol reduces latency in heavy workloads
- M.2 2280 form factor fits standard desktop and laptop slots
- 1 500 000 hour MTBF rating for long-term reliability
Samsung 9100 PRO 1TB NVMe SSD
The Samsung 9100 PRO 1TB PCIe 5.0 x4 NVMe M.2 2280 internal SSD is built for desktop and laptop users who need fast sequential read and write speeds. Its M.2 2280 form factor fits standard slots in compatible systems.
PCIe 5.0 x4 interface
The single specification that decides compatibility is the PCIe 5.0 x4 NVMe interface; the motherboard must provide an M.2 slot wired for PCIe 5.0 x4 to deliver the rated performance. Without that link the drive will fall back to the slot's maximum supported generation.
Straightforward M.2 installation
Installation is a simple matter of inserting the drive into the M.2 2280 slot at the correct angle and securing it with the retention screw. The most common issue is using a slot that shares bandwidth with other devices, which can limit the drive to a lower PCIe generation.
Høydepunkter
- 1 TB capacity for large project files
- PCIe 5.0 x4 interface for fast sequential throughput
- NVMe protocol reduces latency in heavy workloads
- M.2 2280 form factor fits standard desktop and laptop slots
- 1 500 000 hour MTBF rating for long-term reliability
Spesifikasjoner
| Brand | SAMSUNG |
|---|---|
| Part Number | MZ-VAP1T0B/AM |
| MTBF | 1,500,000 hours |
Spørsmål om denne varen
What does the 9100 PRO's PCIe 5.0 x4 interface mean for real-world throughput?
The drive uses a PCIe 5.0 x4 NVMe link, which sets the maximum theoretical bandwidth the drive can reach when the host platform also supports PCIe 5.0.
Which motherboard slot and keying does the M.2 2280 form factor require?
The drive fits a standard M.2 2280 slot with an M-key connector; the board must provide a PCIe 5.0 x4 lane allocation to that slot for full speed.
What clearance and mounting hardware does the 2280-length card need inside a case?
The card measures 80 mm long and uses a single screw at the far end; ensure the motherboard standoff is present and that no heatsink or cable blocks the slot.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
