SanDisk
SanDisk WDS100T2G0C-00CDH0 1TB internal SSD
A 1 TB PCIe Gen3 x4 NVMe 1.3 M.2 2280 internal SSD reaching 2,400 MB/s read speeds
- Device TypeInternal SSD
- Capacity1TB
- InterfacePCIe Gen3 x4 NVMe 1.3
- Fast NVMe performance for daily computing — up to 2,400MB/s read speed
- Shock-resistant solid-state design protects data from bumps and drops
- Slim M.2 2280 form factor fits laptops and desktops with an NVMe slot
- PCIe Gen3 x4 NVMe 1.3 interface delivers responsive system operation
- 1TB capacity stores large files, applications and media collections
WD Green SN350 1TB NVMe drive
This SanDisk WDS100T2G0C-00CDH0 is a 1TB internal SSD built on the WD Green SN350 platform. It connects through an M.2 2280 slot using a PCIe Gen3 x4 NVMe 1.3 interface. The drive delivers sequential read speeds up to 2,400 MB/s for everyday computing tasks.
Suits mainstream PC upgrades.
The SSD fits laptops and desktops that have an M.2 2280 key-M socket supporting NVMe. It provides a responsive boot and application experience for general workloads. Users who need the higher bandwidth of PCIe Gen4 should consider a different drive.
PCIe Gen3 x4 NVMe 1.3 interface
The single specification that determines compatibility is the PCIe Gen3 x4 NVMe 1.3 interface. Your motherboard or laptop must expose an M.2 key-M slot wired for PCIe NVMe operation. Without that slot the drive cannot be installed or used.
Høydepunkter
- Fast NVMe performance for daily computing — up to 2,400MB/s read speed
- Shock-resistant solid-state design protects data from bumps and drops
- Slim M.2 2280 form factor fits laptops and desktops with an NVMe slot
- PCIe Gen3 x4 NVMe 1.3 interface delivers responsive system operation
- 1TB capacity stores large files, applications and media collections
Spesifikasjoner
| Brand | Western Digital |
|---|---|
| Model | WDS100T2G0C-00CDH0 |
| Part Number | WDS100T2G0C-00CDH0 |
| Device Type | Internal SSD |
| Capacity | 1TB |
| Interface | PCIe Gen3 x4 NVMe 1.3 |
| Fraktvekt | 0.05 kg |
| Pakkestørrelse | 127 × 102 × 25 mm |
Spørsmål om denne varen
Does the M.2 2280 form factor need a specific M-key slot?
Yes, the drive uses an M-key M.2 2280 connector that fits a PCIe Gen3 x4 NVMe 1.3 slot.
What is the common mistake when installing the drive into the motherboard?
Inserting the drive at the wrong angle or not securing it with the retention screw after seating it fully in the M.2 slot.
How do I maintain the drive's performance over its usable life?
Enable TRIM in the operating system and keep at least 10 percent of the 1TB capacity free for wear-levelling.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
