Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Gray triple-fan ATX graphics card, 331 by 129 by 66 mm, 3.2-slot design

Sapphire Tech

Sapphire Tech NITRO+ Radeon RX 9070 XT 16GB 11348-01-20G graphics card

SKU CH-EK1J-2W7P1 MPN 11348-01-20G

Refurbished Radeon RX 9070 XT with 16GB GDDR6, boost clock up to 3060 MHz, triple-fan cooler and PCI Express 5.0 x16 interface

  • InterfacePCI Express 5.0 x16
  • Chipset ManufacturerAMD
  • GPU SeriesAMD Radeon RX 9000 Series
  • GPURadeon RX 9070 XT
  • ArchitectureRDNA 4
  • Game ClockUp to 2520 MHz
  • 16 GB GDDR6 memory for high-resolution textures
  • Boost clock up to 3060 MHz for responsive frame rates
  • PCI Express 5.0 x16 interface for maximum bandwidth
  • Triple-fan cooler on a 331 mm ATX card for sustained thermals
  • Four display outputs including two DisplayPort 2.1a for multi-monitor setups

Sapphire NITRO+ Radeon RX 9070 XT 16GB

The Sapphire NITRO+ Radeon RX 9070 XT is a refurbished graphics card built on the RDNA 4 architecture. It carries 4096 stream processors and 16GB of GDDR6 memory across a 256-bit interface. The card targets gamers and creators who need high frame rates at 1440p or entry 4K. It fits ATX cases with a 331 mm length and 3.2-slot width.

Upgrade path from older GPUs

Moving to this card from an RDNA 2 or earlier GPU brings PCI Express 5.0 x16 bandwidth and a 20 Gbps memory subsystem. The jump is worth it when your current card cannot sustain 60 fps in modern titles at native resolution. A 304W TDP and 850W recommended PSU mean you must verify power headroom before installing.

16GB GDDR6 capacity and headroom

The 16GB frame buffer handles large texture packs, heavy mod lists and 4K gaming without paging to system RAM. At 7680 x 4320 output the memory can become the limiting factor in the most demanding scenes. Triple fans keep the 3060 MHz boost clock stable under sustained loads. VR ready support covers current headsets.

Høydepunkter

  • 16 GB GDDR6 memory for high-resolution textures
  • Boost clock up to 3060 MHz for responsive frame rates
  • PCI Express 5.0 x16 interface for maximum bandwidth
  • Triple-fan cooler on a 331 mm ATX card for sustained thermals
  • Four display outputs including two DisplayPort 2.1a for multi-monitor setups

Spesifikasjoner

BrandSAPPHIRE
SeriesNITRO+
Model11348-01-20G
Part Number11348-01-20G
InterfacePCI Express 5.0 x16
Chipset ManufacturerAMD
GPU SeriesAMD Radeon RX 9000 Series
GPURadeon RX 9070 XT
ArchitectureRDNA 4
Game ClockUp to 2520 MHz
Boost ClockUp to 3060 MHz
Stream Processors4096
Effective Memory Clock20000 MHz (20 Gbps)
Memory Size16GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI2 x HDMI
DisplayPort2 x DisplayPort 2.1a
ColorGray
Max Resolution7680 x 4320
Virtual Reality ReadyYes
CoolerTriple Fans
Thermal Design Power304W
Recommended PSU Wattage850W
Power Connector1 x 12V-2x6-pin
HDCP ReadyYes
Form FactorATX
Max GPU Length331 mm
Card Dimensions (L x H)331 x 129 x 66 mm
Slot Width3.2 Slots
Fraktvekt2.63 kg
Pakkestørrelse432 × 241 × 89 mm

Spørsmål om denne varen

What case clearance and PSU capacity does the 331 mm, 3.2-slot card with a 304 W TDP require?

The card measures 331 mm long and occupies 3.2 slots, so your case must accept at least that length and thickness; the manufacturer recommends an 850 W power supply for the 304 W board.

How do I connect the single 12V-2x6 power plug and avoid the common mistake of using an older adapter?

Plug the native 12V-2x6 connector directly into a compliant PSU cable; do not use a 12VHPWR or dual 8-pin adapter, as they are not rated for this interface.

When should I plan to replace the thermal paste on the triple-fan cooler?

Re-paste the GPU die and memory pads every two to three years, or sooner if temperatures rise noticeably under load.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.