Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

Seagate

Seagate ST91000640SS 1TB 7200RPM SAS 2.5in internal hard drive

SKU CH-AEQB-NXJX5

A 1 TB 2.5 in SAS drive spinning at 7200 RPM with 64 MB cache, rated for 1.4 M hours MTBF and 24×7 operation

  • 1TB capacity for high-density storage
  • 7200RPM spindle speed for responsive data access
  • SAS 6Gb/s interface for enterprise connectivity
  • 64MB cache buffer for improved throughput
  • 4M hours MTBF for 24×7 reliability

Enterprise Nearline Drive

The Seagate Constellation.2 ST91000640SS is a 1TB 2.5-inch SAS hard drive spinning at 7200RPM with a 64MB buffer. It is supplied as a lot of 10 new units rated at 1.4M hours MTBF for 24×7 operation. The 6Gb/s interface supports high-density deployments reaching 76TB per square foot.

Suited For Dense Arrays

This drive suits builders populating 2.5-inch SAS bays in storage servers or JBOD enclosures where nearline reliability and power efficiency matter. It is not for systems that only accept 3.5-inch drive carriers or lack a SAS backplane and controller.

Deciding Specification

The 2.5-inch SAS 6Gb/s form factor is the single specification that determines compatibility; the drive will only function in bays and controllers designed for that exact interface and physical size.

Høydepunkter

  • 1TB capacity for high-density storage
  • 7200RPM spindle speed for responsive data access
  • SAS 6Gb/s interface for enterprise connectivity
  • 64MB cache buffer for improved throughput
  • 4M hours MTBF for 24×7 reliability

Spesifikasjoner

Ingen publiserte spesifikasjoner for denne varen ennå.

Spørsmål om denne varen

Will the 2.5 inch SAS drive fit a standard 2.5 inch drive bay?

Yes, the 2.5 inch form factor matches standard 2.5 inch drive bays and the SAS 6Gb/s interface uses the same physical connector as other 2.5 inch SAS drives.

What is the correct way to connect the SAS data and power cables during installation?

Attach the SAS data cable to the controller port first, then connect the combined SAS power connector; reversing the order can prevent the drive from spinning up.

How often should I monitor the drive health given the 1.4M hour MTBF rating?

Schedule SMART checks monthly and plan for replacement after five years of 24×7 operation, as the MTBF is a statistical average not a guaranteed lifespan.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.