Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

Seasonic

Seasonic FOCUS ATX3 (2024) GX-850 power supply

SKU CH-C3ZQ-MJKG3 MPN FOCUS ATX3 (2024) GX-850

Delivers 850 W via ATX 3.1 with full modular cabling, 80 PLUS Gold efficiency and a 135 mm FDB fan in a compact 150 mm depth

  • TypeATX 3.1
  • Maximum Power850 W
  • Fans1 x 135 mm Fluid Dynamic Bearing (FDB) Fan
  • Max PSU Length150 mm
  • ModularFull Modular
  • Energy-Efficient80 PLUS GOLD Certified
  • ATX 3.1 standard supports modern GPU power demands
  • 850 W output handles RTX 40 Super and 50 series cards
  • Full modular cabling reduces clutter for cleaner builds
  • 80 PLUS Gold certification lowers energy waste and heat
  • 135 mm fluid dynamic bearing fan runs quietly under load

FOCUS GX ATX 3.1 850 W

This full-modular power supply delivers 850 W of continuous power and meets the ATX 3.1 specification. It carries 80 PLUS Gold certification and uses a single 135 mm fluid-dynamic-bearing fan for cooling. The unit accepts a universal 100 - 240 V input range and measures 140 mm by 150 mm by 86 mm.

For RTX 40 Super and RTX 50 builds

Builders pairing this unit with RTX 40 Super or RTX 50 graphics cards gain native 12V-2x6 connector support. Systems that do not need the new connector will still operate normally, but the extra cable may be unnecessary. Anyone needing more than 850 W should consider a higher-capacity model.

ATX 3.1 compliance decides fit

The ATX 3.1 label confirms the supply includes the 12V-2x6 interface required by the latest GPU power standard. If your graphics card uses the older 12-pin or 8-pin connectors only, the new interface is not mandatory for operation.

Høydepunkter

  • ATX 3.1 standard supports modern GPU power demands
  • 850 W output handles RTX 40 Super and 50 series cards
  • Full modular cabling reduces clutter for cleaner builds
  • 80 PLUS Gold certification lowers energy waste and heat
  • 135 mm fluid dynamic bearing fan runs quietly under load

Spesifikasjoner

BrandSeaSonic
SeriesFOCUS GX ATX 3 (2024)
ModelGX-850
TypeATX 3.1
Maximum Power850 W
Fans1 x 135 mm Fluid Dynamic Bearing (FDB) Fan
Max PSU Length150 mm
ModularFull Modular
Energy-Efficient80 PLUS GOLD Certified
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Dimensions140 mm (L) x 150 mm (W) x 86 mm (H)
Fraktvekt2.72 kg
Pakkestørrelse305 × 185 × 114 mm

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Does my case need to accept a 150 mm long ATX power supply for the GX-850 to fit?

Yes, the unit is 140 mm deep and the spec lists a maximum PSU length of 150 mm, so your case must support at least that depth.

Can I keep using my older PCIe 6+2 pin cables with this fully modular 850 W unit?

Yes, the modular design lets you connect only the cables you need, and the 80 PLUS Gold certified 850 W output works with standard PCIe 6+2 pin connectors for existing graphics cards.

How do I confirm the 135 mm FDB fan is spinning correctly after installation?

Power on the system and listen for the fan; the fluid dynamic bearing should run quietly at low load and increase speed as power draw rises toward 850 W.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.